Grundig GBP 7000 3D manual Network settings by using wired connection, English 15­

INITIAL SETUP-----------------------------------------------------------------------------------------------------------------------

Network settings by using wired connection

The device must be connected to a wired router with an ethernet cable.

Please see chapter "CONNECTION AND PREP- ARATION".

1Press »SETUP« to open the main menu.

2 In the main menu select »Settings« by using »A« or »S« and press »ENTER« to con- firm.

3 Select »Network« by using »A« or »S« and press »ENTER« to confirm.

	Language	Network
	Parental
		Interface	Wired
	System	Link Status	Link Down
		MAC Adress	00:22:84:fb:c 6c:65
Settings		IP Mode	Manual
	Network	IP Adress	0.0.0.0
		Subnet Mask	0.0.0.0
	BD-Live	Gateway	0.0.0.0
		Primary DNS	0.0.0.0
	Display	Secondary DNS	0.0.0.0
		Signal Strength	Good
	Audio	Network Name (SSID)	grinternet
4 Select »IP Mode« by using »A« or »S« and

press »ENTER« to confirm.

5 Choose the setting (»Dynamic« or »Manual«) by using »A« or »S« and press »ENTER« to confirm.

Notes:

7The IP Mode option provides two configura- tion modes for IP:

–Dynamic – Enables DHCP, the addresses are automatically assigned by the router.

–Manual – Requires user to config- ure network settings such as IP ad-

dress, subnet mask, gateway, etc. It is able to show subnet mask, gateway, primary DNS, secondary DNS when "IP Mode" is set as "Manual".

7If you choose the option "Dynamic", go to step 11.

If you choose the option "Manual", continue with step 6).

6 Select »IP address« by using »A« or »S« and press »ENTER«.

Enter the IP address by using the number but- tons.

Select »Ok« by using »S« and press »ENTER« to confirm,

or select »Cancel« by using »S« and press »ENTER« to cancel the setting.

7Select »Subnet Mask« by using »A« or »S« and press »ENTER«.

Enter the Subnet Mask by using the number buttons.

Select »Ok« by using »S« and press »ENTER« to confirm,

or select »Cancel« by using »S« and press »ENTER« to cancel the setting.

8 Select »Gateway« by using »A« or »S« and press »ENTER«.

Enter the Gateway address by using the number buttons.

Select »Ok« by using »S« and press »ENTER« to confirm,

or select »Cancel« by using »S« and press »ENTER« to cancel the setting.

Note:

7The primary and secondary DNS (Domain Name System) in the next setting are the network adresses of the server allocated by the provider.

9 Select »Primary DNS« by using »A« or »S« and press »ENTER«.

Enter the Primary DNS by using the number buttons.

Select »Ok« by using »S« and press »ENTER« to confirm,

or select button »Cancel« by using »S« and press »ENTER« to cancel the setting.

ENGLISH 15­