Grundig GBP 7000 3D manual Manual settings in wireless connection, IP Settings, English 17­

INITIAL SETUP-----------------------------------------------------------------------------------------------------------------------

–Display: ”»« Connection to (WLAN network name), Verifying Internet Connection…” appears.

–Display: »«, if the connection is success- ful.

8Press »SETUP« to return to the main menu.

Note:

7 For the »IP Settings« and »Network test« set- tings, see “Network settings by using wired connection” section.

Manual settings in wireless connection

1At step 4 in “Network settings by using wireless connection” section, select »Manual« by using »A« or »S« and press »ENTER« to confirm.

– Manual setting menu opens.

Language

	Parental	Wireless
		Manual
	Encryption	Network List	Disabled
	System
Settings	Name
	Network
	Password
		Connect Cancel
	BD-LivePress ENTERManualto open keyboard
	!Display	IP Settings
	Name is case-sensitive

Audio

2 Select »Encryption« by using »A« or »S« and press »ENTER« to confirm.

3 Select the encryption from your wireless net- work by using »A« or »S« and press »ENTER« to confirm.

4 Select »Name« by using »A« or »S« and press »ENTER« to confirm.

– The keyboard appears.

	Language
	Parental		Wireless
		Manual
	Encryption	Network List		Disabled
	System
Settings	Name
	Network
	Password
		Connect	Cancel
	BD-LivePress ENTERManualto open keyboard
	Name is case-sensitive	IP Settings
	!Display
	Audio

5 Select the first character of the network name (capital and small letters, numbers, symbols) by pressing »A«, »S«, »A« or »S« and confirm by pressing »ENTER«.

Repeat the procedure for all characters.

After you finish entering all characters, select the push button »OK« on the keyboard by pressing »A«, »S«, »A« or »S« and press »ENTER« to confirm.

Notes:

7You can choose between numbers, lower and upper case letters, and special charac- ters by using the push buttons »« and »« in the keyboard.

7If you make a mistake during entry, press »A«, »S«, »A« or »S« to select the push button »« and press »ENTER« to confirm. The last character is deleted.

6 Select »Password« by using »A« or »S« and press »ENTER« to confirm.

– The keyboard appears.

7 Select the first character of the password (capital and small letters, numbers, symbols) by pressing »A«, »S«, »A« or »S« and confirm by pressing »ENTER«. Repeat the pro- cedure for all characters.

After you finish entering all characters, select the push button »OK« on the keyboard by pressing »A«, »S«, »A« or »S« and press »ENTER« to confirm.

8 Select »Connect« by using »S« and press »ENTER« to confirm,

or select »Cancel« by using »S« and press »ENTER« to cancel the setting.

–Display: ”»« Connection to (WLAN network name), Verifying Internet Connection…” appears.

–Display: »«, if the connection is success- ful.

9Press »SETUP« to return to the main menu.

IP Settings

Please refer to "Network settings by using wired connection".

ENGLISH 17­