LG Electronics HR933M Wired Network Setup, Preparation, If you select Test and press Enter

Connecting 19

Wired Network Setup

If there is a DHCP server on the local area network (LAN) via wired connection, this player will automatically be allocated an IP address. After making the physical connection, a small number of home networks may require the player’s network setting to be adjusted. Adjust the [NETWORK] setting as follow.

Preparation

Before setting the wired network, you need to connect the broadband internet to your home network.

1.Select [Connection Setting] option in the [Setup] menu then press ENTER (b).

2.The [Connection Setting] menu will appear on the screen. Use W/Sto select the [Wired] and press ENTER (b).

3.Select [Yes] and press ENTER (b) to continue. The new connection settings reset the current network settings.

4.Use W/S/A/Dto select the IP mode between [Dynamic] and [Static].

Normally, select [Dynamic] to allocate an IP address automatically.

,,Note

If there is no DHCP server on the network and you want to set the IP address manually, select [Static] then set [IP Address], [Subnet Mask], [Gateway] and [DNS Server] using W/S/ A/Dand numerical buttons. If you make a mistake while entering a number, press CLEAR to clear the highlighted part.

4.Select [OK] and press ENTER (b) to apply network settings.

5.The player will ask you to test the network connection. Select [OK] and press ENTER (b) to complete the network connection.

6.If you select [Test] and press ENTER

(b) at step 5 above, the network connection status is displayed on the screen.

You can also test it on the [Connection Status] in the [Setup] menu.

2

Connecting