LG Electronics HR933M, HR935M, HR939M Auto Set UP, Language Setting, Channel Setting, Time Setting

24System Setting

3

System Setting

Auto Set UP

You can reset the recorder to all its factory settings. Some options cannot be reset (Rating and Password). The [Auto Setup] menu appears on the screen after the factory settings.

Step 1. Language Setting

1.Use W/S/A/Dto select a language for the on-screen display, and press ENTER (b).

Step 2. Channel Setting

1.Use W/S/A/Dto select a country, and press ENTER (b).

2.While the Start option is selected, and press ENTER (b) to begin the channel search.

If you want to search channels in numerical order, uncheck the box [Automatic Numbering] by using ENTER (b)

.

The recorder automatically searches for and saves the programmes.

If you select [Stop], the [Channel Setting] function will be skipped.

3. Press ENTER (b).

Step 3. Time Setting

1.Use A/Dto select an option among [Manual] or [Auto], and press ENTER (b).

Auto: Set the programme that broadcasts a clock signal and the clock will be set automatically.

If the time that has automatically set is not correct comparing your local time, you can set additional time option.

Manual: If there is no channel that broadcasts a clock signal in your area, you can set the time and date manyally. Use W/Sto select each field, and input correct time and date using A/ D. You can use numerical buttons.

2.Press ENTER (b) to complete the time setting.

Step 4. Network Setting

1.Refer to “Wired network connection” on pages 18-19 to complete the [Wired] setup option, and press ENTER (b).

Select [No] and press ENTER (b) to cancel.

2.Refer to “Wireless network connection” on pages 20-22 to complete the [Wireless] option, and press ENTER (b).

Select [Cancel] and press ENTER (b) to cancel. This recorder can apply only one network setup between [Wired] and [Wireless]. If you already set the [Wired] at step 6, you do not need to set [Wireless] setting.