Resolution Setting

The player provides several output resolutions for HDMI OUT and COMPONENT VIDEO OUT jacks. You can change the resolution using [Setup] menu or pressing the RESOLUTION button in stop mode.

Note:

Since several factors affect the resolution of video output, see “Video output according to the Resolution setting” on next page.

Auto – If the HDMI OUT jack is connected for TVs providing display information (EDID), auto- matically selects the resolution best suited to the connected TV. If the COMPONENT VIDEO OUT is only connected, this changes the resolution to 1080i as default resolution.

1080p – Outputs 1080 lines of progressive video. (only for HDMI connection)

1080i – Outputs 1080 lines of interlaced video.

720p – Outputs 720 lines of progressive video.

480p – Outputs 480 lines progressive video.

480i – Outputs 480 lines of interlaced video.

How to change the resolution using RESOLUTION button

Press RESOLUTION button in stop mode.

RESOLUTION button

How to change the resolution using Setup menu

1.Press HOME and the Home Menu appears.

2.Select [Setup] and press ENTER. The Setup menu appears.

3.Use v / V to select [DISPLAY] option then press B to move to the second level.

4.Use v / V to select the [Resolution] option then press B to move to the third level.

5.Use v / V to select the desired resolution then press ENTER to confirm your selection.

Available resolution according to connection and media format

HDMI OUT connection

•For the 480i resolution setting, real output resolu- tion of HDMI OUT will change to 480p.

•If you select a resolution manually and then con- nect the HDMI jack to TV and your TV does not accept it, the resolution setting is set to [Auto].

•If you select a resolution that your TV does not accept, the warning message will appear. After resolution change, if you cannot see the screen, please wait 20 seconds and the resolution will automatically revert back to the previous resolu- tion.

•The 1080p video output frame rate may be auto- matically set to either 24Hz or 60Hz depending both on the capability and preference of the con- nected TV and based on the native video frame rate of the content on the BD-ROM disc.

COMPONENT VIDEO OUT connection

•For the 1080p resolution setting with unprotected media, real output resolution of COMPONENT VIDEO OUT will change to 1080i.

•For the 720p, 1080i, 1080p resolution setting with protected media, real output resolution of COM- PONENT VIDEO OUT will change to 480i or 480p depending on the connectivity of HDMI cable.

•BD, DVD or Netflix video stream could prevent up- scaling on analog output.

VIDEO OUT connection

•The resolution of the VIDEO OUT jack is fixed to 480i.

Notes:

•Depending on your display, some of the resolution settings may result in the picture disappearing or an abnormal picture appearing. In this case, press HOME key then RESOLUTION repeatedly until the picture re-appear.

•This player supports simultaneous output of all video out jacks. The resolution of the HDMI output will not be the same as the resolution output on the component video output.

Installation and Setup