Reference
Controlling a TV with the Supplied Universal Remote Control
You can control the volume, input source, and power state of your TV with the supplied Universal Remote Control.
If your TV is listed in the table on page 36, set the appropriate manufacturer code. Follow steps
You can control your TV using the buttons below.
TV POWER
Button
| TV Control |
| Buttons |
Number |
|
Buttons |
|
By pressing | You can |
TV POWER | Turn the TV on or off. |
INPUT | Switch the TV’s input source |
| between the TV and other input |
| sources. |
CH +/– | Scan up or down through |
| memorized channels. |
VOL +/– | Adjust the volume of the TV. |
MUTE | Temporarily turns TV sound |
| OFF, press again to restore. |
Note:
Depending on the unit being connected, you may not be able to control your TV using some of the buttons.
To program the remote to control the TV using the manufacturer code
If your TV is listed in the table on the next page, set the appropriate manufacturer code.
1.While holding down TV POWER button, press the number buttons to select the manufacturer code for your TV (Refer to table on the next page).
•If more than one code number is listed, try entering them one at a time until you find the one that works with your TV.
2.Release TV POWER button.
Notes:
•Depending on your TV, some or all buttons may not function on the TV, even after entering the correct manufacturer code.
•If you enter a new code number, the code num- ber previously entered will be erased.
•When you replace the batteries of the remote, the code number you have set may be reset to the default setting. Set the appropriate code number again.
Reference
35