Samsung SHR-3010 user manual 7Reservation Record Setup, Size, Left, Move

DIGITAL VIDEO RECORDER

GB GB

7Reservation Record Setup

AREA=2		LEVEL=OFF	[SIZE][MOVE]	The following illustrates the intial setting of the TIMER RECORD SETUP menu.
					TIMER RECORD SETUP
	AREA 2				TIMER	DAY	START	END	FIELD RATE
					OFF	---	--:--	--:--	--.--
					OFF	---	--:--	--:--	--.--
					OFF	---	----:	----:	----.
					OFF	---	--:--	--:--	--.--
					OFF	---	--:--	--:--	--.--
					OFF	---	--:--	--:--	--.--
					OFF	---	--:--	--:--	--.--
					OFF	---	--:--	--:--	--.--
					OFF	---	--:--	--:--	--.--

3)SIZE

Set the size of the area currently selected. Press the UP( ) button to increase the size of the area vertically, or press the DOWN( ) button to decrease the size of the area vertically.

Press the RIGHT(			) button to increase the size of the area horizontally, or press the							●	Timer recording enables the system to automatically record when you are not present so that
LEFT(	) button to decrease the size of the area horizontally. After setting the size, press
											the recording is performed on the desired day at the desired time with the desired field rate.
the SET/STILL(			) button to move the curstor so that you can set the MOVE item.
											First position the cursor at the line where TIMER row is set to OFF to set it to ON, select
											the desired day from the DAY row, and enter the recording start and end time into START
											and END row respectively. Also, set the field rate to be applied during recording in the
				AREA=2 LEVEL=MIDDLE			[MOVE]				FIELD RATE row. If you set the DAY from SUN to SAT, the timer recording setting is
					[SIZE]
											applied only to the corresponding days, but if you set it to DAILY, the timer recording
											setting is applied to all days of the week. FIELD RATE can be set from 0.50 FPS to 60 FPS
											if the input video signal is NTSC and from 0.50 FPS to 50 FPS if it is PAL. Once the timer
											recording is set, the recording will be made on the corresponding day for the duration of
											entered time. Other recording settings, except the field rate, follow the basic recording
											settings. To force stop the recording, press and hold the STOP(■ ) button for 3 seconds.
											Then, the recording will pause for 5 seconds. If no action is performed by the user for 5
4) MOVE											seconds, the system determines whether the timer recording setup time is elapsed and
											resumes the recording it not. To completely stop the recording, go into the menu within 5
Set the position of the area currently selected. Press the UP(								) or DOWN(	) button to
											seconds to set the TIMER item of the corresponding line to OFF.
change the position of the area vertically, or press the LEFT(								) or RIGHT(	) button
											Timer recording can be set for up to 11 different times.
to change the position of the area horizontally. After setting them all up, press the
SET/STILL(		) button to move the cursor to the AREA item so that you can set each
item for other areas.
				AREA=2 LEVEL=MIDDLE [SIZE]
						[MOVE]

3-21 3-22