Chapter 5. Configuration
·SYNC CHANNEL: Select the channel to display TEXT data from a POS device.
·DEVICE
-NORMAL : Select NORMAL when connecting a normal input device such as a bar code scanning device.
-Finger 007 : Select 'Finger007' when connecting a finger print scan device.
·CHECK PROTOCOL
-HEADER1
-HEADER2
-DELIMITER
-LINES : Set the number of lines to display TEXT data.
5.6.4 POS quick guide
Connect the system to the POS device using a serial cable. In order to display Text data over a screen, at least one of the channels is to be set to TEXT recording mode and TEXT display. Set whether to display TEXT data over a screen from SETUP 'EVENT SETUP' EVENT – TEXT MONI- TORING. Select the channel to display TEXT data over a screen from SETUP 'EVENT SETUP ' TEXT
·DEVICE : NORMAL / Finger007 type are available. NORMAL means a normal input device such as a bar code scanning device. Finger007 means a finger print scan device.
·PROTOCOL : When PROTOCOL is set to °ÆOFF°Ø, header1, header2, and delimiter are not activated.
·Header1: Input letters that indicate the beginning of TEXT data in order to analyze device data.
·Header2: Input letters that indicate the beginning of TEXT data. (Two Headers can be input.)
·Delimiter: Input letters that indicate the end of TEXT data
·LINES: Set the number of lines to display TEXT data.
Ex) The following are sample data from a POS device.
Kalatel | Chips | $0.99<0D><0A> | |
3197 Airport Loop Drive<0D><0A> | <0D><0A> | ||
Costa Mesa, Ca. 92626<0D><0A> | TOTAL | $ 7.99<0D><0A> | |
<0D><0A> |
| <0D><0A> |
|
Candy Bar | $1.49<0D><0A> |
|
|
Soft Drink 64oz. | $2.49<0D><0A> |
|
|
When CHECK PROTOCOL is set to OFF, a differ- ent data format from the above is displayed.
When HEADER1/2 is set to none and DELIM- ITER is set to <0D><0A> and LINES is set to 10 lines,TEXT data is displayed as below,
Digital Video Recorder 50 User’s Manual