Environment Setup
Click [Modify storage structure] and exit the system in the surveillance. Then the system | 3 | Recording/Display |
Storage Structure |
| |
will reboot and you can | Recording/Display [Recording and Transfer] | |
Once you reboot the system below window will appear and select the drive to allocate | ||
again. Finally click [proceed] button. |
|
|
Format selected disk drive
Format newly allocated HDD
|
| Description |
|
| Select Camera |
|
| : Select a camera no. to set the display size, compression quality and transmission quality by |
| Selecting File System | camera. |
| Select the type of File System that will be formatted and click [OK]. Then new storage | The camera setting is displayed on hardware tab [Camera] and indicated camera are the |
| structure will be created and SPR Smart View starts up. | channels that are currently recored. |
|
| The display size, compression quailty and transmission quality are independently set and |
|
| saved by camera no. |
|
| Recording frame rate per camera |
|
| : Adjust the number of frames to be saved by camera. |
|
| Put amount on a scroll bar and adjust the amount of recording as pressing the left button of |
|
| the mouse. (The amount of recording by camera is indicated by number on the right side.) |
3- | 2 |