Samsung SPR-7416 manual Password setup, System IP Set-up, Network Port Setting, Password change

Environment Setup

: If an IP is not set up in window, set up system IP in SPR Smart View system.	7	Password setup
System IP Set-up
Select [System IP Set-up] button and input IP address, Subnet mask, Gateway in the next		Password setup
window appears, and then press [OK] button.
When SPR Smart View Restart Window appears, select [OK] button to restart the system.

	[Notice]
	When you try to connect to DVR from SPR Smart Viewer(Remote), SPR Smart View(DVR)
	checks the site code and password together.
	Network Port Setting	Description
	: Network ports used for View-Viewer commnunication must be the same on the both sided.
		Password change
	Site’s network ports can be assigned here.
		: You can assign password to three operators and some functions can be set to work with
		permission. (Operator 1 can be in charge of everything and operator 2 and 3 can modify
		permitted items only.
		Level	: Click Level button to change the each operator’s password.
		Old password	: Enter current password you are using
		New password : Enter new password
		Confirm	: Enter new password again
		Password Setup
		: 1st level administrator can block some mode from 2nd and 3rd level administrator.
		The function will be activated by ticking on that box.
		[Notice]
		If you lose your password, pleas delete C:\WINNT\dPassword.ini and
3-6			3-7