7.Point the remote directly at the
front panel of the device you want to control. Press ON•OFF on the remote and wait 2 seconds.The remote is testing a single code for your device’s brand.
Did your device turn off?
YES: Press the STOP key to store the code.You’re done! You’ve programmed this device key.
NO: Press ON•OFF again.The remote tests the next code for your brand.
Keep pressing ON•OFF every 2 seconds until your device turns back on. When it does, press STOP.
NOTES
Throughout the programming of each key, be sure to keep the remote pointed at the IR sensor of the device you are currently programming the remote to control.
Test the remote with the device to make sure the device key is programmed with the correct code for maximum functionality. If some features don’t work, try a different code. See the “Testing the Code for Maximum Functionality” section below for more information.
During the Brand Code Search, the remote ignores keypresses that aren’t part of the search.
The search times out after two minutes (the indicator light blinks four times and turns off, and the last programmed code under that device key is retained).
The indicator light blinks four times and turns off when the remote has gone through all the codes.The remote exits the Brand Code Search. If your device hasn’t turned off yet, try a different search method.
Testing the Code for Maximum Functionality
1. | Try a variety of the device’s functions with the remote. If |
| some device features don’t work, go to the next step to try |
| a different code. |
2. | Repeat the Brand Code Search from the beginning. When |
| the device turns off for the first time, don’t press the STOP |
| key, which would store the same code. Instead, with the |
| unit now off, continue to press the ON•OFF key repeatedly |
| until the unit turns back on. |
Direct Code Entry
Direct Code Entry lets you enter a code from the accompanying code list for your brand of device. It’s not as easy as the other methods, but it’s potentially the fastest method.
1. Manually turn on the device you want to control.
2. Find the Code List that came with |
| Lists |
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
the remote. Locate the section for | Listade |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
| Code | Códigos |
|
|
|
|
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||
the type of device you’re trying to |
|
|
|
| TV |
|
| 6 | 7 |
| 8 | 9 |
|
|
|
|
|
|
program, and find your brand in |
|
|
| 3 | 4 | 5 |
|
|
|
| 7 | 8 |
|
|
|
|
| |
|
| 1 | 2 |
| VCR |
|
|
|
|
|
|
|
|
|
|
| ||
| 0 |
|
|
|
|
|
|
|
|
| 9 |
|
|
|
| |||
that section. Circle the codes for |
|
|
|
|
|
| 4 | 5 | 6 |
|
|
| 7 | 8 |
|
|
| |
|
|
|
| 2 | 3 |
|
|
|
|
|
|
|
| |||||
|
|
|
| 1 |
|
|
| D |
|
|
|
|
|
|
|
|
| |
|
|
| 0 |
|
|
|
| DV |
|
|
|
|
|
| 9 |
|
| |
your brand and keep them handy. |
|
|
|
|
|
|
|
|
| 4 | 5 | 6 |
| 6 | 7 | 8 |
| |
|
|
|
|
|
| 2 |
| 3 |
|
|
|
|
| |||||
|
|
|
|
|
| 1 |
|
|
|
| LE |
|
|
|
|
| ||
|
|
|
|
| 0 |
|
|
|
| SAT/CAB |
|
|
|
|
| 9 | ||
|
|
|
|
|
|
|
|
|
|
| 3 | 4 |
| 5 |
|
|
|
|
|
|
|
|
|
|
|
| 1 | 2 |
|
|
|
|
|
|
|
| |
|
|
|
|
|
| 0 |
|
|
|
|
|
|
|
|
|
| ||
3. If you’re programming theTV or SAT•CBL•DTC key, go to step 4.
If you’re programming the VCR•DVD key, you need to tell the remote which kind of device you want this key to control, VCR or DVD.
Press and hold the VCR•DVD key. While you’re holding down the VCR•DVD key, use your other hand to press the number key for the type of device you want to control with this key: 2 for VCR, 3 for DVD.Then release both keys.
TV
TV | VCR•DVD SAT•CBL•DTC |
VCR•DVD SAT•CBL•DTC
4.Press and hold the device key you want to program (the indicator light comes on).
While you’re holding down the device key, use your other hand enter the first
TV | TV |
VCR•DVD SAT•CBL•DTC | VCR•DVD SAT•CBL•DTC |
3. | Once the unit turns back on, you have found another code |
| that operates the device. Press the STOP key. |
4. | Test the key’s functionality again by attempting to control |
| a variety of the device’s functions. If the code that has |
| been stored controls the majority of the device’s functions, |
| programming is complete. If the code stored does not give |
| maximum functionality, try another code. |
5.When you’ve finished entering the
Is the indicator light on?
YES: You’re done!You’ve programmed this device key.
Indicator light
TV
VCR•DVD SAT•CBL•DTC
NO, it blinked four times and turned off: You have either entered a code number that is not in the code lists or missed a step in the code entry procedure.Try step 3 again.
NOTES
If your brand isn’t listed in the code list, use one of the Code Search methods to program the remote control. (Refer to the Auto and Manual Code Search methods.)
If you release the device key any time during the Direct Code Entry procedure, the indicator light blinks four times, and the process is exited.The last programmed code under the device key is retained.
Test the remote with the device to make sure the device key is programmed with the correct code for maximum functionality. If some features don’t work, try a different code in the list.