Generic Pioneer Charter OCAP.fm Page 10 Friday, July 20, 2007 1:28 PM
2.Locate the two (2) enclosed AA batteries. Match the + and - marks with those in the battery case, then insert them.
3.Align the cover’s keys with the case’s holes and press the cover back into place. The tab should click when the cover is locked.
4.Test the remote control by pressing any mode key (e.g., TV). If the batteries are inserted
correctly, the LED (red light) blinks once.
NOTE: When batteries need replacement, the remote control ceases to operate. Replace the batteries and the unit will be restored to its full functionality, complete with your favorite settings.
PROGRAMMING DEVICE CONTROL
The C4000 and S4000 Remote Controls are preprogrammed to operate the cable box (converter) provided by your cable system, an RCA TV, a Toshiba DVD player, and a Pioneer audio receiver. To control devices other than the default brands, perform the following steps; otherwise skip this section.
NOTES: For control of a Combo device (for example, a TV/VCR combo), skip this section and per- form the instructions on “Setting Up a Combo Unit” on page 11. Also refer to “Device Table” on page 9 to find out which devices can be programmed onto each device key.
If you have another brand of cable converter or a satellite receiver you would like to control, you’ll need to unlock the cable ID Lock before changing the converter code (see “Program- ming Cable ID Lock” on page 17).
1.Turn on a device and, if applicable, insert video media, (e.g., cassette or disc).
NOTE: Please read steps 2 through 4 completely before proceeding. Highlight or write down the codes and device you wish to program before moving on to step 2.
2.On the remote control, press a device key once (i.e., AUX, DVD, TV, CBL, or STB); it blinks
once. Then press and hold SET UP until the selected mode key blinks twice.
3.Use the “Manufacturer’s Codes” starting on page 24) to locate the type of device and brand name and then enter the first
www.urcsupport.com
10