Generic Pioneer Charter OCAP.fm Page 14 Friday, July 20, 2007 1:28 PM
For example, to find out which code is operating your TV:
1.On the remote control, press TV once; it blinks once. Then press and hold SET UP until the TV key blinks twice.
2.Enter 9 9 0. The TV key blinks twice.
3.To view the code for the first digit, press 1
once. Count the number of times the TV key blinks (e.g., 3 blinks = 3) and write down the number in the leftmost TV Code box on page 11.
NOTE: If a code digit is 0, the selected mode key does not blink.
4.Repeat step 3 three more times for the remaining digits. Use 2 for the second digit, 3 for the third digit, 4 for the fourth digit, and 5 for the fifth digit. Finish writing down the
code in the TV Code boxes on page 11.
5.To check for other device codes, repeat steps 1 through 4, but substitute the appropriate key (e.g., AUX, DVD, CBL, or STB) for the device you are checking. Write down the codes in the appropriate boxes on page 11.
www.urcsupport.com
14