Universal Electronics C4000, S4000 Setting UP a Combo Unit, Aim the remote control at the device

Generic Pioneer Charter OCAP.fm Page 11 Friday, July 20, 2007 1:28 PM

NOTE: If the selected mode key emits a long blink, the entry is invalid. Repeat steps 2 through 3 and try entering the same code again.

4.Aim the remote control at the device and

press PWR once. The device should turn off. If it does not, repeat steps 2 through 3, trying each code for your brand until you find one that works. If it still does not respond, try searching for the code (see “Searching for Your Code” on page 12).

NOTE:	If the device does not have a PWR key, press
	the (Play) key.

5.Repeat steps 1 through 4 for each device you want the remote control to operate. For future reference, write down each working device code in the boxes on the following page.

AUX Code

Device Type:___________________

DVD Code

Device Type:___________________

CBL Code

Device Type:___________________

TV Code

Device Type:___________________

SETTING UP A COMBO UNIT

If you own a combo unit such as a TV/DVD Combo or a TV/VCR Combo, you need to follow special steps to set it up. Perform the following instructions to control combo device:

www.urcsupport.com

11