Universal Electronics pmn manual To clear the Option key

Page 25

To clear the OPTION key:

1. On the Millennium 3, press and hold SETUP until the LED blinks twice, then release SETUP.

2.Enter 9 - 9 - 5. The LED will blink twice.

3. Press OPTION once.

4. Press and hold SETUP until the LED blinks twice, then release SETUP.

5.The OPTION key is now clear and ready for reprogramming.

25

Image 25

Contents Millennium Table of Contents Introduction Features and Functions Use Guide to display the program guide Key ChartsOn Demand VOD see Installing Batteries Programming TV Control Setup Codes for TVsAOC JBL CXCJCB KEC JVCKTV LXITMK SSSProgramming VCR Control Setup Codes for VCRsHI-Q CCEKLH STS 0038 Programming TV/VCR Combo Control Setup Codes for TV/VCR Combos To program the Cable key To unlock the Cable keyTo lock the Cable key Setup Codes for Cable ConvertersABC NSCHTS Setup Codes for DBS ReceiversUsing the Shift KEY Searching for Your Code Enter 9 9 0. The LED will blink twice Checking the CodesTo program Option to remember channels To program Option for all On/OffTo clear the Option key Problem TroubleshootingSolution Additional Information