Pentair LX-100EZ owner manual System Includes, Equipment Location

INSTALLATION MANUAL

LX-100EZ EASYTOUCH POOL-SPA CONTROL SYSTEM

IMPORTANT SAFETY INSTRUCTIONS

READ AND FOLLOW ALL INSTRUCTIONS

CAUTION

All wiring must be performed by a qualified electrician. Basic safety precautions and local codes should always be followed when installing and using this electrical equipment.

WARNING

To reduce the risk of injury, do not permit children to use this product unless they are closely supervised at all times.

CAUTION

The Hand-held Remote is not waterproof. If it accidentally gets submerged, disassemble by removing screw. Remove battery and let unit dry out. Reassemble.

SAVE THESE INSTRUCTIONS.

SYSTEM INCLUDES:

P/N	Model Number	Description
520045	LX-100EZT	RF Power Center (with antenna and o-ring)
263045	CVA-24T	Valve Actuators (2 qty.)
520018	———	Hand-held Remote (1 qty.)
		OR
520051	LX-100EZTL	RF Load Center (with antenna and o-ring)
263045	CVA-24T	Valve Actuators (2 qty.)
520018	———	Hand-held Remote (1 qty.)

EQUIPMENT LOCATION

With the exception of the optional Spa-side Remote Control (which is ETL listed for installation right at the tile-line of the spa), all equipment must be located five feet or more from the water’s edge.

1.LX-100 RF Power/Load Center at the equipment site.

2.Valve Actuators at valves to be motorized.

Rev. F 3-26-04 5 P/N 520050