Magnetic Stripe Reader Option | POSIFLEX Business Machines XP3300

highest priority of printer setup mode. For the setup priority of printer, whatever hardware switch or software setting can be choose by software.

CAUTION: On doing any function’s modification of switches, please contact authorized dealer or technicians. Failure to do this could make the printer malfunction.

Paper Jam Problems

When Paper is jammed inside the printer – Push down the hood release button then the printer cover can be released. Remove the jammed paper and reinstall the paper roll. Close the hood properly and firmly for operation.

Magnetic Stripe Reader (Option)

For magnetic stripe card reading, please insert the card to the bottom and magnetic stripe facing the marked aside of slot. In spite of the card’s movement can be two-way of the slot, the reading process should be passing through whole slot horizontally. A non- standard card recorded without complete degaussing prior to recovery may accept only one direction in card reading.

The MSR in XP-3000/3300 series reads the ISO or JIS-II magnetic stripe card without driver. Yet, there is a “Posiflex USB MSR Manager” program provided to control some parameter configuration for ISO MSR.

The controllable features in this program covered: each track enable/disable, Alt+Num approach for ASCII codes and Leading/Stop code enable/disable. The function for enabling

each track comes in effect only when the track is physically available. Please find in the Product Information CD delivered with system “\Drivers\SD_Series\USBMSR_xxx” and “Set Up” this manager program or download the installation program from our official website http://www.posiflex.com or http://www.posiflex.com.tw.

Page 10