Printer Operation

the preloaded Windows system with a USB interface touch panel controller. This program can also be obtained by download from the POSIFLEX web site.

Mouse Emulation Touch Function

The touch panel in XP-3000/3300 system uses internal USB interface as standard and occupies no external port. When the touch driver is properly installed, this touch panel works exactly like a standard mouse for each interface. Nevertheless, if the system is running under safe mode, the touch panel calibration may become

unsatisfactory due to disabled drivers. It is recommended to use a standard USB mouse or keyboard in this mode.

All the mentioned mouse emulation functions can be manipulated through relevant software. The system can give a beep and a click on the left button of a mouse at the point when the touch panel is touched. If the point touched is dragged across the screen surface, it works as the mouse drag and drop feature. If the point is touched, released and touched within a short time interval, it is double-clicking left button of the mouse. To obtain the effect like clicking on the right button of a mouse, touching any point on the screen surface after touching the right-click sticky button results as a click on the right button of the mouse at that point.

In the left side of XP-3000/3300 series’ main unit, the printer with auto cutter is integrated in XP-3012/3015/3312/3315.

For loading paper, please follow step A to F sequentially with refer to pictures to use the printer.

Step A: Please hold the LCD panel and push lock/release lever for tilt angle adjust forward. Turn the panel forward to most vertical position (Note 1).

Step B: Push the printer cover release button.

Printer cover	Paper Exit
release button

Page 7