UPS Battery (Option)
CAUTION: Please notice that to connect the UPS battery only before power up the system or when system is switch off. Always disconnect the UPS battery when the system is to be left powered off for more than few days.
When the |
| |
UPS battery, the UPS battery is in the carton at delivery. | PUSH | |
Please release the compression lock of bottom plate and | ||
| ||
open the bottom plate as picture at right. Next, please |
| |
unfasten these two screws which fasten the UPS bracket |
| |
and take out the bracket as shown in the lower left |
| |
picture. |
|
Please take it out and place it in the battery compartment at centre lower part of the bottom area as arrowed in the picture at bottom centre. Passing the cable through the groove and connect the cable to its connector in the main connection area which shown in the picture at bottom centre. Assemble the bracket after plug the connector and cover the bottom plate.
Please pay particular attention to the environment requirement for UPS battery in following chapter “APPLICATION ENVIRONMENT”.
Page 11