Display Issues

Indicator	Terminal Status	LED colour
Power Status	Standby	Orange

	Power On	Blue
	Power On	Blue
Printer Error	Error	Red
Printer Paper Out	Paper Out	Red

CAUTION: Before any installation or cable connection to the set, please always make sure that the system is turned off and the external power source to the set is removed to prevent electric hazard! Never touch any metal pin in the connectors or circuits to avoid high voltage hazard or electrostatic discharge damage unless the operator is well grounded. Failure to do the above will void the product warranty!

Main LCD Display

For best viewing result, please set your display resolution is 1024 x 768. The system Video Memory is shared from system memory. XP-3000/3300 series support DVMT Function and the video memory size is default in 128 MB and can be set to be 64 MB.

VGA Port

The VGA port in the XP-3000/3300 system supports either a rear mount 2nd display or a separately connected LCD monitor or touch monitor. To support the DC power to the 2nd display monitor, it required a qualified technician to set up through BIOS setting. To supply the necessary power through the VGA connector, please refer to the Posiflex technical information. Do not connect other monitor to this port before the power in this port is disabled.

Posiflex USB Touch Manager

A program named “Posiflex USB Touch Manager” and a right-click sticky button tool in the program group “Posiflex USB Touch Tools” is installed in

Page 6