Leviton Programmer/Remote manual Set Associations, OFF button, Associations when Next Step is

Scroll to and press the center button to select Add Devices which will bring up a list of the dimmers and switches you included in Step 1 to add to your new area. Scroll to each device check box and use the and buttons to either add or subtract each device from your area.

NOTE: You can use the

4 ON button	4 ON	on the bottom
of the RZCPG to select ALL
devices simultaneously. The 4
OFF button	OFF	deselects ALL

devices. This feature will work whenever you encounter check box lists.

x1

AREA #1

Bedroom

Bathroom

Hall

selected 1 Back (3) Who Is

x1

AREA

<<NEW >> Area #1

Back Next Step

Once you have checked the devices for your area press the right soft key (Save). The AREA screen will display with your newly created area and prompt you to continue to create a new area by pressing the center button to select <<NEW>> or to continue to the Next step by pressing the right soft key .

NOTE: You can use the 1 ON button 1 ON					and
1 OFF button		OFF on the RZCPG to turn the lights
ON and OFF in an area that has the selection box
around it.	Set Associations
STEP 5
NOTE: The INSTALL CHECKLIST					x1
screen will appear with the
				INSTALL CHECKLIST
selection box around STEP 5 - Set				1. Include Dim/Swch
Associations when NEXT STEP is				2. Include Controller
chosen from STEP 4.				3. Update Controller
				4. Create Areas
NOTE: If no controllers are in				5. Set Associations
system, use down arrow button				Back	Next Step
to skip to STEP 6.					x1
Press the center button			to bring
				ASSOCIATION
up the ASSOCIATION screen.
				Room Controller
A list of controllers included in				Hall Controller
				Den Controller
Step 2 that support association will
be displayed.				Back	Next Step
Scroll to and press the center
button	to select the controller
you wish to associate an area or areas to.					9