Installation Checklist

INCLUDE DIM/SWCH Press button on Dimmer/Switch

Cancel

Leviton provides the Installation Checklist as a step by step tool to setup your ViziaTMRF network and recommends following these steps in order, specifically if you are a first time user. System design will impact performance, so it is necessary to include and update your devices in a specific order to ensure overall system performance and reliability. The Installation Checklist steps are shown below. When a step is completed, simply press the right soft key to select NEXT STEP and the RZCPG will bring you to the next screen.


	INSTALL CHECKLIST				INSTALL CHECKLIST
					3. Update Controller
	1.	Include Dim/Swch
2.		Include Controller		4.		Create Areas
3.		Update Controller		5.		Set Associations
4.		Create Areas		6.		Security
5.		Set Associations			7.	Install Complete
	Back		Next Step		Back		Next Step

Using your RZCPG, follow these steps to set up your ViziaRFTM network:

STEP 1 Include Dimmers/Switches

Pressing the center button to select Include Dim/Swch will bring you to the INCLUDE DIM/SWCH screen and put the

RZCPG into Inclusion Mode. You will be prompted to press a

button on your Dimmer, Switch or Plug-In Module. These devices

require a simple one step process (button press) to include into the network (refer to individual device instruction sheet). Once the button is pressed on your Dimmer, Switch or Plug-In Module, the RZCPG will go through a communication process and assign the node information for that device. The TEXT EDITOR will display. You can now name your device.

NOTE: The RZCPG is by default assigned #1.