Leviton Programmer/Remote manual Table of Contents

Page 2

TABLE OF CONTENTS
INTRODUCTION	1
MENU NAVIGATION & ICONS	2–4
STARTUP	4
INSTALLATION CHECKLIST	5
Include Dimmers/Switches	5
TEXT EDITOR	6
Include Controller	6, 7
Update Controller	7, 8
Create Areas	8, 9
Set Associations	9, 10
Security	10, 11
Install Complete	11
MAIN Menu screen	12
device list	12
who is	12
area	13
profile	13, 14
settings	14
CONTRAST	14
BUZZER	14
SECURITY	15
BATTERY LEVEL	15
sYSTEM SETUP (Advanced Settings)	15
NETWORK	16–19
ASSOCIATION	19
HAI SETUP	19
RTS DEVICES	19
UTILITIES	20

Image 2

Contents Programmer/Remote Table of Contents Introduction Programmer/RemoteButton LeftArrow Buttons DisplaySingle brackets on ChartEvent, etc By Installation StartupInstallation Checklist Include Dimmers/SwitchesTo use the pre-made Templates Text EditorInclude Controller Update Controller Include Controller byCreate Areas Step Associations when Next Step isSet Associations OFF buttonSecurity ON, 1 OFF, 2 ON, 2 OFF etcInstall Complete WHO is Main Menu ScreenDevice List Area ProfileBuzzer SettingsContrast Advanced Settings? Battery LevelSystem Setup SecurityJoin as Secondary NetworkNetwork Rediscovery Controller inclusion This step will erase anyExisting data in the remote Replication processReplace Node Refer to Text EditorRTS Devices HAI SetupAssociation Device PropertiesWho Is Refer to WHO Is... pg.13 Version ResetUtilities Rediscovery PLPage Limited 5 Year Warranty and Exclusions Leviton Instruction SHEET/MANUAL