Hearth and Home Technologies RCTS-MLT operating instructions Adjusting Low Flame setting LP only

Page 4

Adjusting “Low Flame” setting (LP ONLY)

1.Using a 5/16 in. slotted screwdriver turn brass screw inside regulator tower two complete rotations clock- wise. See figure 6.

Figure 6.

4.Light the fireplace as directed in the Owner’s Manual.

5.Adjust “High Flame” by turning solenoid clockwise to increase pressure and counterclockwise to reduce pressure. Adjust until the reading on the manometer is 3.5 inches w.c. for natural gas and 10 in w.c. for LP.

6.Tighten jam nut (Figure 4 and Figure 7) to the face of the regulator tower body.

7.Turn the main gas knob on the gas valve OFF.

8.Remove the manometer from the pressure tap and tighten the pressure tap closed.

9.Connect blue wires from the solenoid to the orange wires on the remote receiver box. See Figure 8.

2.Loosen outlet pressure tap and install a manometer.

3.Light the fireplace as directed in the Owner’s Manual.

4.Continue to adjust the LP “Low Flame” by turning brass screw clockwise to increase pressure and coun- terclockwise to reduce pressure. Adjust until the low pressure reading on the manometer to 6.3 in. w.c.

5.Proceed to installing Flame Control Solenoid.

WARNING

EXPLOSION RISK!

•Adjust lowpoint setting BEFORE installing flame control solenoid on LP units.

NOTE: A manometer MUST be used to set the manifold pressure on the gas valve.

REMOTE

RECEIVER

RED

ORANGE

JAM NUT

REGULATOR

TOWER

Figure 8.

BLUE

PLUNGER

Installing the Flame Control Solenoid and Wiring the Flame Controller (NG & LP)

1.Ensure the Flame Control Solenoid is not attached to the remote control receiver box.

2.Loosen outlet pressure tap and install a manometer.

3.Install Flame Control Solenoid by turning it into the regula- tor tower five complete rotations clockwise. See figure 7.

JAM NUT

Figure 7.

Finalizing Remote Installation

1.Turn the main gas knob ON, relight pilot flame, and turn fireplace ON.

2.Inspect gas connections around solenoid and regulator tower with a comercially available, non-corrosive leak check solution.

3.Turn fireplace off and proceed to next section.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents RCTS-MLT Remote Control Kits Receiver Wiring Instructions Installation InstructionsRemote Receiver Alternative Wiring for units with a wall switch Installing Regulator TowerAdding Optional Fan/Blower Adjusting Low Flame setting LP only Finalizing Remote InstallationTransmitter Remote ReceiverTransmitter Settings Setting the ClockMatching Security Codes Operating InstructionsSetting ºF/ºC Scale Setting Desired Room Temperature Thermo OperationsSetting the Countdown Timer Operating the Fan Operates in on or Thermo modeTransmitter Safety Features System CheckLimited Warranty Timer OperationBattery Life General InformationStanding Pilot Ignition Wiring Diagram

RCTS-MLT specifications

Hearth and Home Technologies has established itself as a leader in the home heating and comfort industry, and their RCTS-MLT model exemplifies this commitment through its innovative features and advanced technology. Designed for both functionality and aesthetic appeal, the RCTS-MLT is a radiant catalytic technology stove that offers warmth while accentuating the decor of any space.

One of the standout features of the RCTS-MLT is its radiant heating capability. This technology allows for an efficient and even distribution of heat throughout the room, ensuring that every corner is warm and inviting. The catalytic combustion process significantly reduces emissions, making the stove an environmentally friendly choice for homeowners seeking sustainable heating solutions.

Aesthetically, the RCTS-MLT is designed with elegance in mind. Its contemporary styling and multiple finish options ensure that it can seamlessly fit into various interior designs, whether traditional, modern, or rustic. The large glass window provides an unobstructed view of the flames, creating a cozy ambiance in any living space. Additionally, the adjustable airflow control allows users to customize their heating experience, optimizing comfort while maintaining efficiency.

The RCTS-MLT is also equipped with user-friendly features that enhance the overall experience. The remote control capability enables users to adjust settings from a distance, adding convenience to the operation. With a built-in thermostat, the stove can automatically regulate the temperature, providing consistent warmth without the need for manual adjustments.

Durability and reliability are at the core of the RCTS-MLT’s design. Constructed from high-quality materials, the stove is built to withstand the rigors of regular use while maintaining its performance. It is also designed for easy cleaning and maintenance, ensuring that it remains in optimal condition for years to come.

In summary, the Hearth and Home Technologies RCTS-MLT stands out in the home heating market due to its combination of radiant catalytic technology, stylish design, user-friendly features, and durability. It presents an exceptional choice for those looking to enhance their home’s comfort and aesthetic while being mindful of environmental impacts. Whether you are heating a living room, a den, or a spacious open area, the RCTS-MLT delivers an exceptional heating experience that balances efficiency with elegance.
Top Page Image Contents