General Information

7.Set the SET temperature to at least 2º F (1º C) below the room temperature and the system ﬂame will extin- guish. Thereafter, it should continue to cycle on and off thermostatically approximately every two minutes as the ROOM temperature changes, but only when the temperature differential between ROOM and SET temperatures differs at least 2º F (1º C). The 2º F dif- ferential is the factory setting.

Timer Operation

The countdown timer will operate in either the manual ON or THERMO mode. Once the ﬁreplace system is in an operating mode, set the countdown timer to turn off in 15 minutes. The timer function will allow operation to continue until the “countdown time” on the LCD screen expires. After 15 min. elapses, the system should turn off.

Transmitter Wall Bracket

The transmitter can be hung on a wall using the bracket provided. Locate the bracket on an inside wall sufﬁciently far away from direct sources of heat such as a ﬁreplace, incandescent lighting, or sunlight so it detects ambient room temperatures, not a single heat source. If the bracket is installed on a solid wood wall, drill 1/8” pilot holes and install with the screws provided. If it is installed on a plas- ter/wallboard wall, ﬁrst drill two 1/4” holes into the wall, then use a hammer to tap in the two plastic wall anchors ﬂush with the wall, then install the screws provided.

Battery Life

Life expectancy of the batteries in the transmitter should be at least 12 months. Check batteries annually. When the transmitter no longer operates the remote receiver from a distance it did previously (i.e., the transmitter’s range has decreased) the batteries should be checked.

Speciﬁcations
	Power Requirements:	3V 2 ea.; AAA 1.5V, Alkaline
Transmitter	Operating Frequency:	303.8 MHZ
Transmitter	FCC ID No.’s:	K9L300ITX
	Canadian ISC ID No.’s:	2439 102 760
	Power Requirements:	110-120 VAC; 60Hz
Remote	Operating Frequency:	303.8 MHZ
Remote	FCC ID No.’s:	K9L3003RX
	FCC ID No.’s:	K9L3003RX
	Canadian ISC ID No.’s:	2439 102 760A

Service Parts List

DESCRIPTION	SERVICE PART NO.
3-PRONG ADAPTOR	HTI -18-006

SOLENOID-110 VOLT HI/LO	4021-379

TRANSMITTER WALL HOLDER	HTI -16-006

BATTERIES-TRANSMITTER	HTI -14-006

RECEIVER	HTI -13-006

TRANSMITTER (RCT-MLT-HNG)	HTI -12-006-HNG

TRANSMITTER (RCT-MLT-HTL)	HTI -12-006-HTL

TRANSMITTER (RCT-MLT-QF)	HTI-12-006-QF

HARDWARE PACKAGE	HTI -11-006

Limited Warranty

This REMOTE CONTROL SYSTEM is warranted for 12 months from the date of purchase or installation to the original purchaser to be free from defects in materials and workman- ship. Damage to the SYSTEM caused by accident, misuse, abuse, or installation error whether performed by a contractor, service company, or owner, is not covered by this warranty. Seller will not be responsible for labor charges and/or damage incurred in installation, repair, replacement or for incidental or

consequential damages. Batteries and any damage caused by them are not covered by this warranty.

Some states, provinces, and nations do not allow exclusion or limitations of incidental or consequential damages, so the above limitations or exclusions may not apply. This warranty gives you speciﬁc legal rights. You may have other rights that vary by state, province or nation.

RCTS-MLT specifications

Hearth and Home Technologies has established itself as a leader in the home heating and comfort industry, and their RCTS-MLT model exemplifies this commitment through its innovative features and advanced technology. Designed for both functionality and aesthetic appeal, the RCTS-MLT is a radiant catalytic technology stove that offers warmth while accentuating the decor of any space.

One of the standout features of the RCTS-MLT is its radiant heating capability. This technology allows for an efficient and even distribution of heat throughout the room, ensuring that every corner is warm and inviting. The catalytic combustion process significantly reduces emissions, making the stove an environmentally friendly choice for homeowners seeking sustainable heating solutions.

Aesthetically, the RCTS-MLT is designed with elegance in mind. Its contemporary styling and multiple finish options ensure that it can seamlessly fit into various interior designs, whether traditional, modern, or rustic. The large glass window provides an unobstructed view of the flames, creating a cozy ambiance in any living space. Additionally, the adjustable airflow control allows users to customize their heating experience, optimizing comfort while maintaining efficiency.

The RCTS-MLT is also equipped with user-friendly features that enhance the overall experience. The remote control capability enables users to adjust settings from a distance, adding convenience to the operation. With a built-in thermostat, the stove can automatically regulate the temperature, providing consistent warmth without the need for manual adjustments.

Durability and reliability are at the core of the RCTS-MLT’s design. Constructed from high-quality materials, the stove is built to withstand the rigors of regular use while maintaining its performance. It is also designed for easy cleaning and maintenance, ensuring that it remains in optimal condition for years to come.

In summary, the Hearth and Home Technologies RCTS-MLT stands out in the home heating market due to its combination of radiant catalytic technology, stylish design, user-friendly features, and durability. It presents an exceptional choice for those looking to enhance their home’s comfort and aesthetic while being mindful of environmental impacts. Whether you are heating a living room, a den, or a spacious open area, the RCTS-MLT delivers an exceptional heating experience that balances efficiency with elegance.

Timer Operation