Installation Instructions

Canadian Equipment Requirements

This digital apparatus does not exceed the (Class A/Class B)* limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. Le present appareil numerique n’emet pas de bruits radioelectriques depassant les limites applicables aux appareils numeriques (de la class A/de la class B)* prescrites dans le Reglement sur le brouillage radioelectrique edicte par le ministere des Communications du Canada.

This device complies with RSS-210 of Industry and Science Canada. Operation is subject to the following two conditions:

(1)this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Installing Electrical Service to the Junction Box

WARNING

Shock hazard.

•Turn electrical power off at the circuit before starting work.

NOTE: Some appliances do not have a cover plate. In- stead, there is a hole through which the Romex clamp is attached to the outer wrap.

1.Remove the electrical cover plate from the lower side of the ﬁreplace. Remove the knock-out from the plate and attach the Romex clamp (screws to the outside). See Figure 1.

		REMOTE
		RECEIVER
		RED	VALVE
		RED	TH
ON/OFF
SWITCH	REMOTE SWITCH	RED
SWITCH	REMOTE SWITCH
	PIGTAIL		TP
			TP
	RED		TP TH
			TP TH
	BROWN
Figure 1	WALL
Figure 1	SWITCH

2.Feed the electrical service wires through the Romex clamp and secure the wires to the clamp.

3.Using the wire nuts provided, connect the service wires to the junction box. The black wires to the black service wire, the white wires to the white service wire, and the service ground wire to the ground stud of the junction box.

4.Reattach the cover plate to the outside of the ﬁreplace.

WARNING

Shock hazard.

•Leave electrical power off at this time.

•Do not restore power until the remote control system is completely installed.

REMOTE RECEIVER

CAUTION

•Damage to receiver possible from elevated temperatures.

•The remote receiver should be positioned close to front in right or left corner where ambient temperatures do not exceed 170º F.

The remote receiver is powered by 110-120VAC. It plugs into a standard polarized duplex receptacle.

Locating Receiver and Operating Functions

This remote receiver can be positioned under the ﬁrebox in the control compartment of the ﬁreplace if ambient tem- peratures do not exceed 1700 F. This system is designed to control the following components:

		Wire Colors
•	Gas Valve - Millivolt	Red
• Fan/Blower - 110 VAC		Plug from Fan
•	Flame Controller - HI/LO solenoid	Orange

RECEIVER WIRING INSTRUCTIONS

Incorrect wiring connections WILL cause damage to the gas valve or electronic module operating the gas appliance and may also damage the remote receiver.

Wiring Flame Function

Connect the remote receiver by connecting the two red wires leading from the remote receiver to the red and brown remote wires labeled “FOR USE WITH REMOTE OR WALL SWITCH ONLY”. See Figure 2 or alternate wiring diagrams on page 10.

		REMOTE
		RECEIVER
		RED	VALVE
ON/OFF		RED	TH
ON/OFF
SWITCH	REMOTE SWITCH	RED
SWITCH	REMOTE SWITCH
	PIGTAIL		TP
			TP
	RED		TP TH
			TP TH
	BROWN
	WALL
	SWITCH
Figure 2.

RCTS-MLT specifications

Hearth and Home Technologies has established itself as a leader in the home heating and comfort industry, and their RCTS-MLT model exemplifies this commitment through its innovative features and advanced technology. Designed for both functionality and aesthetic appeal, the RCTS-MLT is a radiant catalytic technology stove that offers warmth while accentuating the decor of any space.

One of the standout features of the RCTS-MLT is its radiant heating capability. This technology allows for an efficient and even distribution of heat throughout the room, ensuring that every corner is warm and inviting. The catalytic combustion process significantly reduces emissions, making the stove an environmentally friendly choice for homeowners seeking sustainable heating solutions.

Aesthetically, the RCTS-MLT is designed with elegance in mind. Its contemporary styling and multiple finish options ensure that it can seamlessly fit into various interior designs, whether traditional, modern, or rustic. The large glass window provides an unobstructed view of the flames, creating a cozy ambiance in any living space. Additionally, the adjustable airflow control allows users to customize their heating experience, optimizing comfort while maintaining efficiency.

The RCTS-MLT is also equipped with user-friendly features that enhance the overall experience. The remote control capability enables users to adjust settings from a distance, adding convenience to the operation. With a built-in thermostat, the stove can automatically regulate the temperature, providing consistent warmth without the need for manual adjustments.

Durability and reliability are at the core of the RCTS-MLT’s design. Constructed from high-quality materials, the stove is built to withstand the rigors of regular use while maintaining its performance. It is also designed for easy cleaning and maintenance, ensuring that it remains in optimal condition for years to come.

In summary, the Hearth and Home Technologies RCTS-MLT stands out in the home heating market due to its combination of radiant catalytic technology, stylish design, user-friendly features, and durability. It presents an exceptional choice for those looking to enhance their home’s comfort and aesthetic while being mindful of environmental impacts. Whether you are heating a living room, a den, or a spacious open area, the RCTS-MLT delivers an exceptional heating experience that balances efficiency with elegance.