Matching Security Codes

1.LOW - Battery power low. Replace batteries within two weeks.

2.TIMER - Indicates time remaining before system shuts off, when timer-programmed, 9 - hour maximum setting.

3.MODE - Indicates operation MODE of system. ON indicates the system is on, either manually or thermostatically. THERMO indicates the system will automatically cycle ON/OFF, depending on programmed SET temperature. OFF indicates the entire system is turned off.

4.SET - Indicates desired SET room temperature for THERMO operation.

5.FLAME - Single or double Flame/Hi icon indicates burner/valve operational.

6.CLOCK - Indicates the current time in AM/PM.

7.ROOM - Indicates CURRENT room temperature.

8.OF - Indicates degrees Fahrenheit (ºC indicates degrees Celsius).

9.FAN - Indicates fan is on or programmed to come on. Three speed settings are available.

Figure 8. Transmitter LCD Display Screen

MODE

SETUP

TIMERDOWN

TIME

FANFLAME

It may be necessary to program the remote receiver to the security code of the transmitter upon initial use, if batteries are replaced, or if a replacement transmitter is purchased from your dealer. To program the remote receiver:

1.Set the slide button on the receiver to the REMOTE position.

2.Push the LEARN button (one beep will be heard) on the top of the remote receiver.

3.Then press the MODE button on the transmitter. Several beeps indicate the transmitter’s code has been pro- grammed into the receiver. When an existing receiver is matched to a new transmitter, the new security code will overwrite the old one. NOTE: When the LEARN button is depressed, “beeping” sounds should be heard. If no “beeping” is heard check to see that the receiver has 110-120VAC power to it.

If you are unsuccessful in matching the security code on the ﬁrst attempt, wait 1-2 minutes before trying again.

OPERATING INSTRUCTIONS

To operate the system, press the MODE button (Figure

7)on the transmitter to select the operational MODE de- sired.

•ON indicates the system is on, either manually, timed or thermostatically.

•THERMO indicates the system will automatically cycle ON/OFF, depending on programmed set temperature.

•OFF indicates the entire system is turned off.

Transmitter Settings

Flip open the plastic cover on the front of the transmitter to expose the “SET” buttons.

NOTE: Flashing numbers on the display indicate the sys- tem is waiting for input, such as using the UP and DOWN buttons to program a new setting. If no change is made to ﬂashing digits within 15 seconds, the system will complete the procedure last programmed and reset the display to its normal state.

Setting the Clock

1.Press and hold the TIMER/TIME button on the trans- mitter for more than two seconds. The hour digit(s) will begin ﬂashing (see Figure 8, Location #6).

2.Press the UP or DOWN button until the desired hour is displayed in AM or PM.

3.After setting the desired hour, press and release the TIMER/TIME button again to set the minutes; the minute digits will begin ﬂashing.

4.Press the UP or DOWN button until the desired minutes are displayed.

5.Press and hold the TIMER/TIME button again for more than two seconds. The time digits will cease ﬂashing, indicating the clock has been successfully set. You may also press the SET button on the transmitter to stop the time digits from ﬂashing and set the time.

RCTS-MLT specifications

Hearth and Home Technologies has established itself as a leader in the home heating and comfort industry, and their RCTS-MLT model exemplifies this commitment through its innovative features and advanced technology. Designed for both functionality and aesthetic appeal, the RCTS-MLT is a radiant catalytic technology stove that offers warmth while accentuating the decor of any space.

One of the standout features of the RCTS-MLT is its radiant heating capability. This technology allows for an efficient and even distribution of heat throughout the room, ensuring that every corner is warm and inviting. The catalytic combustion process significantly reduces emissions, making the stove an environmentally friendly choice for homeowners seeking sustainable heating solutions.

Aesthetically, the RCTS-MLT is designed with elegance in mind. Its contemporary styling and multiple finish options ensure that it can seamlessly fit into various interior designs, whether traditional, modern, or rustic. The large glass window provides an unobstructed view of the flames, creating a cozy ambiance in any living space. Additionally, the adjustable airflow control allows users to customize their heating experience, optimizing comfort while maintaining efficiency.

The RCTS-MLT is also equipped with user-friendly features that enhance the overall experience. The remote control capability enables users to adjust settings from a distance, adding convenience to the operation. With a built-in thermostat, the stove can automatically regulate the temperature, providing consistent warmth without the need for manual adjustments.

Durability and reliability are at the core of the RCTS-MLT’s design. Constructed from high-quality materials, the stove is built to withstand the rigors of regular use while maintaining its performance. It is also designed for easy cleaning and maintenance, ensuring that it remains in optimal condition for years to come.

In summary, the Hearth and Home Technologies RCTS-MLT stands out in the home heating market due to its combination of radiant catalytic technology, stylish design, user-friendly features, and durability. It presents an exceptional choice for those looking to enhance their home’s comfort and aesthetic while being mindful of environmental impacts. Whether you are heating a living room, a den, or a spacious open area, the RCTS-MLT delivers an exceptional heating experience that balances efficiency with elegance.