Special Conditions in Program Mode

oIf the On-Time of a Time Period matches the Off-Time of the same Time Period, the Time Period is disabled.

oIf the Off-Time of the First Time Period crosses over to the On-Time of the second Time Period, the Off-Time of the first Time Period will have precedent, for example, if Time Period 1 is programmed to end at 2:00 pm whereas Time Period 2 is programmed to commence at 1:00 pm, the following will occur:

	Time Period 1

On-Time		Off-Time
8:00 am		2:00 pm

	1:00 pm		4:00 pm

	On-Time		Off-Time

		Time Period 2

Operates in Time Period 1 Setting

Operates in Time Period 2 Setting

Displaying Temperature in Celsius or Fahrenheit

The default setting of the Remote Control is to display the temperature in Fahrenheit.

However, the Remote Control can be changed to display temperature in Celsius by the following steps:

1.Ensure the Remote Control is switched off by using the On/Off button.

2.Press and hold the “-”button.

3.While the “-”button is held down, press and release the “+” button, this will toggle the temperature display between °C and °F.

This setting is stored in memory hence the Remote Control will continue to display the temperature in Celsius even if the battery is replaced.

FPI FireGenieTM Remote Control Manual