Regency FireGenie operating instructions 7a Programming the Rest of the Week

Page 13

6) Programming the Set Temperature of Time Period 2

Press and release the PROG button one more time to program the Set Temperature of Time Period 2. Use the “+” and - buttons to adjust the temperature setting.

See step 7b) immediately if you would like to copy the set program over to other days of the week.

Time Period 2 Set Temperature

Programming of Time Period 2

7a) Programming the Rest of the Week

Repeat steps 2 to 6 until all 7 days have been programmed.

7b) Alternatively, Copy Programs Over to the Other Days

While the Set Temperature of Time Period 2 is still flashing, pressing and holding the PROG button for 2 seconds or longer will initiate the copying process.

Time Period 2 Set Temperature is flashing.

FPI FireGenieTM Remote Control Manual

13

Image 13
Contents Remote Control FCC Requirements Table of Contents Matching Remote Control & Receiver ID Code Remote Control Keypad Remote Control Basic Functions Remote Control Screen Display LCDSwitching the Remote on & OFF Receiver Operation Setting Time & DayAuto Mode Manual ModeTime Period On-Time Off-Time Advanced Function Program ModeProgramming the On-Time of Time Period Setting the Program ModeProgramming the Off-Time of Time Period Programming the Set Temperature of Time PeriodProgramming of Time Period Time Period 2 On-Time 7b Alternatively, Copy Programs Over to the Other Days 7a Programming the Rest of the WeekNext day of the week flashes Exiting Program ModeInstalling the Receiver to a Wall Mount Installing the ReceiverControl Switch Remote #Remote Battery Replacement TroubleshootingDisplaying Temperature in Celsius or Fahrenheit Special Conditions in Program ModeFPI FireGenieTM Remote Control Manual FPI FireGenieTM Remote Control Manual FPI FireGenieTM Remote Control Manual FPI FireGenieTM Remote Control Manual