Knoll Systems 1080p DLP Press on the projector to, Select the Input mode, About the Input modes

Page 28

3 Press on the projector to

INPUT

select the INPUT mode.

Note

When a signal is not received, “Searching for Source” will be displayed.

About the INPUT modes

Power button

EXIT button

INPUT 2 button

INPUT 4 button

MENU button

 

T, S, W, X

 

buttons

INPUT 1

INPUT 1 button

INPUT 2

INPUT 3

INPUT 3 button

INPUT 4

Basic Operation

INPUT 1

Selects the source Com-

ponent RCA / SCART.

 

 

 

INPUT 2

Selects the source HDMI

1 or 2.

 

 

 

INPUT 3

Selects the source Video

or S-Video.

 

 

 

INPUT 4

Selects the source PC.

 

 

Note

If you select “Auto” as the input source, then the correct input source is selected automatically.

4 Press

on the remote control

or on the projector, then press

Enter to turn off the projector, when the confirmation message is displayed.

Note

If you accidentally press power and do not want to turn off the projector, press Exit button or select Cancel to turn off the confirmation message.

Info

Do not unplug the power cord during projection or cooling fan operation. This can cause damage due to the rise in internal temperature, as the cooling fan also stops.

INPUT button

INPUT

 

ENTER

 

STATUS

EXIT

MENU

ECO

INPUT

27

Image 28
Contents 1080p DLP Front Projector Preface EnglishPreface Product Disposal Contents Appendix Introduction Package Contents Features Temperature indicator ComponentsUsing the Kensington Lock Projector Rear ViewRemote Control Using the Remote Control Connections and Setup Connecting the Projector to Other Devices Before Setting UpConnecting the Power Cord Computer usingConnecting to Video Equipment Connecting to Video EquipmentConnecting to Component Video Equipment Connect an Hdmi to Hdmi cableTo the projector Connect the above cable toConnecting the Projector to a Computer Connecting to a ComputerConnecting the Thumbscrew Cables Plug and Play FunctionUsing the Adjustment Feet Adjusting the Lens Using the Lens ShiftStandard Setup Front Projection Setting up the ScreenAn Example of Standard Setup When using a normal screen When using a wide screenScreen Size and Projection Distance Short throw lens Screen Size and Projection Distance Long throw lens Projection using a mirror Ceiling-mount setupProjection from behind the screen Projecting a Reversed/Inverted ImageBasic Operation Basic OperationBasic Procedure Image ProjectionOutlet PressSelect the Input mode Press on the projector toAbout the Input modes InfoSelecting the On-screen Display Language Press MenuPress Or X to select Language Language, and then pressMenu Bar Items OperationBasic This list shows the items that can be set in the projectorUsing the Menu Screen Menu Selections AdjustmentsAdjusting the Picture Adjusting Image PreferencesSharpness Black Level Advance Adjusting Computer Images Component / PC onlyEasy to Use Functions Selecting the Picture Display Mode Select layoutVideo Computer Overscan Adjust Overscan TypePosition Function Keystone Function Selecting the Economy Mode Setting the Power SaveAutomatic Power OFF Function Sync ThresholdSource Select OSD Time OutFilm Mode OSD BlendingSTI Noise Reduction Blank ScreenSetting the PRJ Mode ResetReversing/Inverting Projected Images Lamp Timer Reset StatusFactory Reset Input SourceAppendix Maintenance Cleaning the projectorCleaning the Ventilative Holes Cleaning Ventilative HolesAbout the Lamp Replacing the LampTemperature LED Over Temperature Removing and Installing the Lamp Unit Follow these instructions to replace the lampConnect the power cord Reset the lamp timerRemove the lamp unit Insert the new lamp unitConnecting Pin Assignments Pin No. Signal Name ReferenceComputer Compatibility Chart ComputerVideo Compatibility Chart IR Remote Key Discrete CodesTroubleshooting INPUT1 ComponentAppendix Product Specifications DescriptionShort Throw Lens Dimension Units mm inchLong Throw Lens Dimension Unit mm inchRelease Version a