Knoll Systems 1080p DLP user manual Troubleshooting, INPUT1 Component

Page 63

Troubleshooting

	Problem	Check

		Projector power cord is not plugged into the wall outlet.
		Projector power cord is not plugged into the wall outlet.

Remote control batteries have run out.

Projector does not start

The selected input mode is wrong.

Cables may be incorrectly connected to the rear panel of the projector.

Power to the external connected device is off.

The video signal format of the video equipment is not set correctly.

No picture

Picture adjustments are incorrectly set.

Color is faded

Adjust the focus

The projection distance exceeds the focus range.

Picture is blurred

(Component/VGA input only)

Perform "Fine Sync" adjustments ("Clock" adjustment) also in component

Perform "Fine Sync" adjustments ("Phase adjustment) also in component

Picture noise appears.

Change the input signal type of the video equipment.

Picture is green on	Appendix
INPUT1 COMPONENT

62

Image 63

Contents 1080p DLP Front Projector English PrefacePreface Product Disposal Contents Appendix Introduction Package Contents Features Components Temperature indicatorProjector Rear View Using the Kensington LockRemote Control Using the Remote Control Connections and Setup Computer using Connecting the Projector to Other DevicesBefore Setting Up Connecting the Power CordConnecting to Video Equipment Connecting to Video EquipmentConnect the above cable to Connecting to Component Video EquipmentConnect an Hdmi to Hdmi cable To the projectorConnecting to a Computer Connecting the Projector to a ComputerPlug and Play Function Connecting the Thumbscrew CablesUsing the Adjustment Feet Using the Lens Shift Adjusting the LensSetting up the Screen Standard Setup Front ProjectionAn Example of Standard Setup When using a wide screen When using a normal screenScreen Size and Projection Distance Short throw lens Screen Size and Projection Distance Long throw lens Projecting a Reversed/Inverted Image Projection using a mirrorCeiling-mount setup Projection from behind the screenBasic Operation Basic OperationPress Basic ProcedureImage Projection OutletInfo Select the Input modePress on the projector to About the Input modesLanguage, and then press Selecting the On-screen Display LanguagePress Menu Press Or X to select LanguageThis list shows the items that can be set in the projector Menu Bar ItemsOperation BasicMenu Selections Adjustments Using the Menu ScreenAdjusting Image Preferences Adjusting the PictureSharpness Black Level Advance Component / PC only Adjusting Computer ImagesEasy to Use Functions Select layout Selecting the Picture Display ModeVideo Computer Overscan Type Overscan AdjustPosition Function Keystone Function Setting the Power Save Selecting the Economy ModeSync Threshold Automatic Power OFF FunctionOSD Time Out Source SelectOSD Blending Film ModeSTI Blank Screen Noise ReductionReset Setting the PRJ ModeReversing/Inverting Projected Images Status Lamp Timer ResetInput Source Factory ResetAppendix Cleaning the projector MaintenanceCleaning Ventilative Holes Cleaning the Ventilative HolesReplacing the Lamp About the LampTemperature LED Over Temperature Follow these instructions to replace the lamp Removing and Installing the Lamp UnitInsert the new lamp unit Connect the power cordReset the lamp timer Remove the lamp unitPin No. Signal Name Reference Connecting Pin AssignmentsComputer Computer Compatibility ChartIR Remote Key Discrete Codes Video Compatibility ChartINPUT1 Component TroubleshootingAppendix Description Product SpecificationsUnits mm inch Short Throw Lens DimensionUnit mm inch Long Throw Lens DimensionRelease Version a