Knoll Systems 1080p DLP user manual Sync Threshold, Automatic Power OFF Function

Page 45

Sync Threshold

This function is only available on Component input.

The projector is compatible with EDTV(480p and 576p) and HDTV(720p,1080i and 1080p) video signals. If a hardware device, such a DVD player, is not syncing properly with the projector, adjust this option to help it to sync when connected to the projector.

Select “Sync Threshold” from the “Options” menu on the menu screen.

For operating the menu screen, see page 30.

Automatic Power OFF Function

When an input signal is not detected or you don't press any input button on Keypad or remote for more than 15 minutes, the projector will automatically turn off if set to “ON”.

Auto Power OFF function will be disabled when it is set to “OFF”.

Select “Auto Power OFF” from the “Options” menu on the menu screen.

For operating the menu screen, see page 30.

Note

•When the Auto Power OFF function is set to “ON”, 5 minutes before the power turns off, the message “Power OFF in 5 min.” will appear on the screen to indicate the remaining minutes.

Easy to Use Functions

44

Image 45

Contents 1080p DLP Front Projector English PrefacePreface Product Disposal Contents Appendix Introduction Package Contents Features Components Temperature indicatorProjector Rear View Using the Kensington LockRemote Control Using the Remote Control Connections and Setup Before Setting Up Connecting the Projector to Other DevicesConnecting the Power Cord Computer usingConnecting to Video Equipment Connecting to Video EquipmentConnect an Hdmi to Hdmi cable Connecting to Component Video EquipmentTo the projector Connect the above cable toConnecting to a Computer Connecting the Projector to a ComputerPlug and Play Function Connecting the Thumbscrew CablesUsing the Adjustment Feet Using the Lens Shift Adjusting the LensSetting up the Screen Standard Setup Front ProjectionAn Example of Standard Setup When using a wide screen When using a normal screenScreen Size and Projection Distance Short throw lens Screen Size and Projection Distance Long throw lens Ceiling-mount setup Projection using a mirrorProjection from behind the screen Projecting a Reversed/Inverted ImageBasic Operation Basic OperationImage Projection Basic ProcedureOutlet PressPress on the projector to Select the Input modeAbout the Input modes InfoPress Menu Selecting the On-screen Display LanguagePress Or X to select Language Language, and then pressOperation Menu Bar ItemsBasic This list shows the items that can be set in the projectorMenu Selections Adjustments Using the Menu ScreenAdjusting Image Preferences Adjusting the PictureSharpness Black Level Advance Component / PC only Adjusting Computer ImagesEasy to Use Functions Select layout Selecting the Picture Display ModeVideo Computer Overscan Type Overscan AdjustPosition Function Keystone Function Setting the Power Save Selecting the Economy ModeSync Threshold Automatic Power OFF FunctionOSD Time Out Source SelectOSD Blending Film ModeSTI Blank Screen Noise ReductionReset Setting the PRJ ModeReversing/Inverting Projected Images Status Lamp Timer ResetInput Source Factory ResetAppendix Cleaning the projector MaintenanceCleaning Ventilative Holes Cleaning the Ventilative HolesReplacing the Lamp About the LampTemperature LED Over Temperature Follow these instructions to replace the lamp Removing and Installing the Lamp UnitReset the lamp timer Connect the power cordRemove the lamp unit Insert the new lamp unitPin No. Signal Name Reference Connecting Pin AssignmentsComputer Computer Compatibility ChartIR Remote Key Discrete Codes Video Compatibility ChartINPUT1 Component TroubleshootingAppendix Description Product SpecificationsUnits mm inch Short Throw Lens DimensionUnit mm inch Long Throw Lens DimensionRelease Version a