CONNECTING EXTERNAL VIDEO SOURCES
CONNECTING A STEREO LASERDISC PLAYER OR DVD PLAYER TO INPUT 2.
1.Connect the cable from the Y OUT of the Laserdisc or the DVD player to the INPUT 2 (Y) jack as shown on the TV set below.
2.Connect the cable from the Cb OUT or
3.Connect the cable from the Cr OUT or
4.Connect the cable from the AUDIO OUT R of the Laserdisc or DVD player to the INPUT 2 (AUDIO/R) jack.
5.Connect the cable from the AUDIO OUT L of the Laserdisc or DVD player to the INPUT 2 (AUDIO/L) jack.
6.Press the INPUT button until VIDEO:2 appears, to view the program from the Laserdisc or DVD player. The mode VIDEO:2 disap- pears automatically after approximately eight seconds.
7.Press the INPUT button to return to the previous channel.
COMPONENT | ||
Y | Cb | Cr |
VIDEO
(MONO)
L
R
AUDIO
INPUT 2
TV INPUT 2
TERMINAL
|
|
| R | L |
| Y Cb Cr | |||||
|
|
| |||||||||
|
|
| AUDIO |
|
|
|
| VIDEO |
|
| |
|
|
|
|
|
|
|
|
| |||
|
|
|
| ||||||||
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
| OUTPUT | |||||
|
|
|
|
|
|
|
|
|
|
|
|
BACK OF DVD PLAYER
HITACHI MODEL or similar model
NOTE: Completely insert the connection cord plugs when connecting to rear panel jacks. The picture that is played back will be abnormal if the connection is loose.
See page 13 for tips on REAR PANEL CONNECTIONS.
17