Hitachi 50UX57B 60UX57B manual PICTURE-IN-PICTURE Surf Mode PIP, Swap button, Move button

PICTURE-IN-PICTURE (PIP)

PICTURE-IN-PICTURE CONT.

SURF MODE PIP

This feature will automatically scan all active channel numbers (those set in memory) and display them as PIP sub-pictures, along the right edge of the screen. Press the PIP button a second time to remove the sub-pictures from the screen.

ANT A 28

PIP

SINGLE

SURF

PIP

NOTE: 1. If no buttons are pressed when in SURF mode, auto-scanning will continuously scan.

2.If a channel is tuned during this SURF scanning, sub-pictures will be removed from the screen.

SWAP button

If you wish to switch what is being shown on the main picture to the sub-picture, press the SWAP button.

ANT A 10 VIDEO: 1

VIDEO: 1 ANT A 10

SWAP

NOTE: 1. The SWAP button will only operate when SINGLE PIP mode is chosen.

2.The SWAP function will not operate if ANT B input is set as the main channel (ANT B input cannot be displayed as a sub-picture.)

MOVE button

To move the sub-picture to another corner, press the MOVE button. The sub-picture moves one step counterclockwise every time the MOVE button is pressed. (Example below illustrates the MOVE operation for initial shipping conditions. If you have customized a PIP position, the MOVE operation may differ slightly from this example.)

ANT A 10

VIDEO: 1

SINGLE

SURF

MOVE

SINGLE ANT A 10

SURF VIDEO: 1

MOVE

SINGLE ANT A 10

SURF VIDEO: 1

MOVE

ANT A 10 VIDEO: 1

It is also possible to customize the PIP position. To do this, wait until the On-Screen Display disappears (about eight seconds) and then use the CURSOR , , , buttons.

SINGLE

SURF ANT A 10 VIDEO: 1

AFTER

EIGHT	FAV	FAV
SECONDS	CH	CH

25