Hitachi 50EX01B manual HOW to USE the Remote to Control Your TV, EXIT/RECALL button, Sleep button

HOW TO USE THE REMOTE TO CONTROL YOUR TV

EXIT/RECALL button

Press this button when no menu is displayed, when you want to check the channel being received, the picture source, or if it has stereo (ST) or second audio (SAP), the time, CHANNEL ID, if SPECIAL EVENT REMINDER is set, and if the SLEEP timer is set.

When in MENU mode, this button will exit all On-Screen Displays.

Audio Selected Main Picture Source

S - IN: 1

When an S-VIDEO Input is connected to VIDEO: 1.

Audio Broadcast

SLEEP

TIMER

STEREO	ANT 10	CHANNEL ID
ST/SA	ABCD	Time
	10:00PM
	PIP ANT 12	Sub-Picture
		Source
		PIP
SLEEP 0:15		SPECIAL
		EVENT
		REMINDER

Y - CBCR: 2

When a COMPONENT VIDEO: Y-CBCRInput is connected to VIDEO: 2.

MENU, CURSOR buttons

All the On-Screen Display features can be set or adjusted by using these buttons.

The MENU button will start the On-Screen Display.

The CURSOR buttons will highlight functions or adjust and set different features.

SLEEP button

Press this button to display the sleep timer in the lower left corner of the screen. Every subsequent press of this button will add 15 minutes to this timer, up to a maximum of three hours. Once set, use RECALL to view time remaining. If the SLEEP button is pressed while the timer is set, it will reset to the original condition.

INPUT button

The INPUT button will select between antenna signal and the two sets of video input jacks each time the button is pressed. If the Picture-in-Picture is on, the INPUT button will select between the two sets of video input jacks and antenna source when main chan- nel is chosen with the PIP CH button. If the sub-picture is chosen, the INPUT button will select between the two sets of video input jacks and the source COMPONENT VIDEO: Y-CBCRINPUT 2 source will be displayed as a blank PIP sub-picture.

ANT A 28

INPUT

S - IN: 1

INPUT

Y - CBCR: 2

INPUT

21