SET UP
SET UP
CONVERGENCE ADJUST
Your Projection TV has three color projection tubes: one for red, one for green, one for blue. When mixed together in the proper proportion, the output of these three colors, however, the beams must be precisely aligned over each other so that the colors can be mixed. The process of aligning these picture beams is called convergence .
Over a period of time, the picture tubes can drift out of alignment due to normal bumps and vibrations or moving the TV. If you move your TV, or if, after a time, you notice color rings or halos around objects in the picture, you may want to converge (align) the colors.
To simplify convergence, the following feature allows you to display a test pattern of horizontal and vertical lines on the screen. Properly converged, the lines appear white, which is actually a combination of the outputs of the three color tubes. The output of the green tube is stationary. The outputs of the red and blue tubes can be adjusted. When properly aligned, the outputs of all three tubes should be directly over each other to produce the white lines.
SET UP CUSTOM | VIDEO | AUDIO | THEATER | INFO |
MENU LANGUAGE
PLUG & PLAY
SIGNAL SOURCE
AUTO CHANNEL SET
CHANNEL MEMORY
CHANNEL LIST
CLOCK SET
CONVERGENCE ADJ. 
MENU TO MENU BAR TO QUIT EXIT
FAV
CH
RED
USE CURSOR TO ADJUST
MENU FOR BLUE/RED
PRESS EXIT TO QUIT
CURSOR
CH | CH | MENU |
FAV | FAV | |
BLUE
USE CURSOR TO ADJUST
MENU FOR BLUE/RED
PRESS EXIT TO QUIT
BLUE
USE CURSOR TO ADJUST
MENU FOR BLUE/RED
PRESS EXIT TO QUIT
CURSOR
FAV | FAV |
CH | CH |
BLUE
USE CURSOR TO ADJUST
MENU FOR BLUE/RED
PRESS EXIT TO QUIT
E X I T
Press the CURSOR | , | to move the color displayed up or down. |
Press the CURSOR | , | to move the color displayed left or right. |
Press MENU to change the color.
Press EXIT to quit.
37