FIRST TIME USE
CONNECTING EXTERNAL VIDEO SOURCES
CONNECTING A COMPONENT SOURCE WITH DIGITAL INTERFACE CAPABILITY TO IEEE1394 TERMINALS
1.Connect the IEEE1394 cable from the output of the component with IEEE1394 capability, such as a
2.Press the MENU button on the Remote Control and select SETUP.
3.Select
4.Select IEEE1394 to verify that the component is properly connected (see page 68).
ANT A
TO
CONVERTER
ANT B
AUDIO
TO
CENTER
IN
IR
BLASTER
L
R
|
|
| ||
| PR | PB | Y |
|
INPUT 1 |
|
|
|
|
| R | (MONO)/L |
|
|
|
|
| AUDIO |
|
| PR | PB | Y/VIDEO |
|
INPUT 2 | R | (MONO)/L |
|
|
|
|
| ||
|
|
| AUDIO |
|
| R | (MONO)/L | VIDEO | |
INPUT 3 |
|
|
|
|
| R | (MONO)/L | VIDEO | |
INPUT 4 |
|
|
|
|
| R | L | VIDEO | |
MONITOR |
|
|
|
|
OUT |
|
|
|
|
AUDIO
OPTICAL OUT Digital Audio
IEEE1394
Multi Media Card
ANT C
(DTV)
IEEE1394 Cable
LINE OUT
R | (MONO)/L | VIDEO |
| ||
1 |
|
|
|
| |
R | (MONO)/L | VIDEO | DIGITAL INTERFACE | ||
IEEE1394 | |||||
2 |
|
|
| ||
|
|
|
|
Digital VCR (D-VHS)
NOTES: 1. To quickly enter IEEE1394 menu, press the AV NET button on the remote control twice when in ANT C mode.
2.The external device that is connected to the IEEE 1394 terminals will not need the AV Network feature (see page 21).
3.This TV’s IEEE1394 connection is not compatible with a DV camcorder (Digital Video camcorder) and a PC.
4.With IEEE1394 connection, video and audio will be received by the TV. It will enable you to control the
5.The IEEE1394 interface contains the copy protection standard called 5C or Digital Transmission Content Protection (DTCP).
6.This TV does not support full network control of several IEEE1394 devices simultaneously (the IEEE1394 will dis- connect from 1st device when making connection to 2nd device).
7.See page 12 for tips on Rear Panel Connections.
20