Hitachi 57T600 important safety instructions Aspect button, Standard

THE REMOTE CONTROL

HOW TO USE THE REMOTE TO

CONTROL YOUR TV

ASPECT button

Press this button to quickly change the picture format ASPECT ratio.

Depending on the input signal format received, the picture format ratio allows you to adjust the images through the following options.

4:3	STANDARD	Use this aspect mode to display conventional (4:3) images. Side panels (gray areas) are placed to the
		left and right of the image to preserve the original aspect ratio of the source. Note: Use this mode for
		only 15% of your total viewing time to prevent uneven aging of the phosphors. Phosphors in the lighted
		area of the picture will age more rapidly than the gray areas.
4:3	EXPANDED	Use this aspect mode to display conventional (4:3) sources by expanding the outer edges of the image
		to fill the 16:9 screen. The center of the image remains unaltered.
4:3	Zoom1/Zoom2	Use these aspect modes to zoom in on conventional (4:3) sources.
16:9 STANDARD		Use this aspect mode to display 16:9 sources like HDTV and DVD’s preserving the original 16:9 aspect
		ratio.
16:9 Zoom		Use this aspect to Zoom-in once while in 16:9 aspect.
(1) NTSC Signal Format received
	4:3
	INPUT
			4:3 STANDARD	4:3 EXPANDED	4:3 ZOOM1

	16:9 ZOOM	16:9 STANDARD	4:3 ZOOM2
(2) 480i/480P Signal Format received
16:9
INPUT	4:3 STANDARD	4:3 EXPANDED	4:3 ZOOM1

	16:9 ZOOM	16:9 STANDARD	4:3 ZOOM2
(3) 720P/1080i Signal Format received
16:9
INPUT	16:9 STANDARD

NOTE: When in ANT C, signal format is dependent on broadcaster.

16:9 ZOOM

28