Mitsubishi Electronics XL5950U user manual Projector + Computer, For Macintosh, About DDC

Projector + Computer

For using the COMPUTER/COMPONENT VIDEO INPUT 2 (Mini D-SUB 15P) terminals

	To COMPUTER AUDIO IN
PC audio cable (option)
						RS-232C	RS-232C/MOUSE	USB
To PC audio	REMOTE REMOTE		INPUT 1	R/PR	G/Y	B/PB	H/HV	V
	IN	OUT
output	MAIN		INPUT 2		AUDIO			VIDEO
					IN		S-VIDEO	2
						Y
								VIDEO
					AUDIO			1
To monitor port					OUT
	To COMPUTER IN	AC IN				C
								L
	(Mini D-SUB 15P)							AUDIO
Computer								R

AUDIO OUT

MONITOR OUTPUT

To COMPUTER OUTPUT

RGB cable for PC (option)

When outputting to both the compute's monitor and the projector.

For using the COMPUTER/COMPONENT VIDEO INPUT 1 (BNC) terminals

								RS-232C	RS-232C/MOUSE	USB
			REMOTE REMOTE		INPUT 1	R/PR	G/Y	B/PB	H/HV	V
			IN	OUT
computer	PC audio cable (option)	to COMPUTER AUDIO IN	MAIN		INPUT 2		AUDIO			VIDEO
							IN		S-VIDEO	2
								Y
										VIDEO
							AUDIO			1
		R/PR
							OUT			L
				AC IN				C
	to PC audio	G/Y								AUDIO
										R
	output	B/PB

H/HV

MONITOR OUTPUT

V

AUDIO OUT	to monitor	Mini D-SUB 15pin-BNC
	port	conversion cable (optional)

ENGLISH

Important:

•When you use a longer RGB cable instead of the provided cable, the picture quality may deteriorate.

•Some computers may require additional connectors or analog RGB output adapters to be connected with this projector. Contact your dealer for further information.

•This projector uses a stereo pin jack for its audio input. Check the type of the audio output terminal of the connected computer and prepare a proper cable for connection. Some computers may not have the audio output terminal.

For Macintosh

•If your Macintosh has no video port, a monitor output adapter is required. Contact your dealer for further information.

•Some Macintoshes may require a MAC adapter for the RGB cable for connection with this projector. Contact your dealer for further information.

About DDC™

The COMPUTER/COMPONENT VIDEO INPUT 2 terminal of this projector complies with the DDC1/2B stan- dard.

When a computer supporting this standard is connected to this terminal, the computer will automatically load the information from this projector and prepare for output of appropriate images.

•After connecting a computer supporting this standard to this terminal, turn on the projector’s main power switch first, and then boot up the computer.

•You may need to install the DDC driver, depending on the computer you use. In this case, you need to down- load the driver from our Web site. Contact your dealer or Mitsubishi sales office for further information.

EN – 11