Advanced features for presentation

Expand

By pressing the EXPAND button on the remote con- trol, you can magnify the detailed image of the picture. You can also view the screen displaying the picture as its original size (native resolution display).

Setting the Expand mode

1.Press the MENU button.

2.Press the $ or % to select the FEATURE menu.

3.Press the ENTER button.

4.Press the { or } button to select EXPAND MODE or FRAME POSI.

5.Press the $ or % to set the EXPAND MODE or

FRAME POSI.

6.Press the MENU button twice to exit the menu sys- tem.

EXPAND MODE

(EXPAND MODE 1) (EXPAND MODE 2) (EXPAND MODE 3) (EXPAND MODE 4)

REAL screen display

•During REAL mode, Press the $ or % buttons for fine adjustment.

•During REAL mode, the { and } buttons are not working. At this time, the prohibition mark ( ) appeares on the screen.

•The expanding rate cannot be changed by press- ing either the + or - button.

Picture in Picture (PinP)

One of the special features of this unit is the picture- in-picture (PinP) mode. PinP allows you to view differ- ent sources at the same time.

Using the PinP mode

1. Press the PinP button on the remote control.

• When the image from VIDEO IN or S-VIDEO

IN terminal is displayed on the screen, the im-

age from COMPUTER IN terminal is displayed

as sub-image.

• When the image from COMPUTER IN terminal

is displayed on the screen, the image from VIDEO

IN or S-VIDEO IN terminal is displayed as sub-

image.

2. If necessary, select the desired external input source

Normal	Zooming	Zooming	Normal
image	image	image	image

FRAME POSI.

(FRAME POSI. (FRAME POSI. 5) 1~4)

1 2

4 3

Main Sub

image image

Zooming	Native resolution
image	display

of the image by using the VIDEO or COMPUTER

button.

To switch Main image and Sub image

3. Press the { or } buttons on the remote control.

To change frame position

4. Press the $ or % buttons on the remote control.

FRAME POSI.

Using the Expand mode

1. Press the EXPAND button.

•You can magnify different areas of the active pic- ture by pressing the {, }, $, % button.

•You can change the magnification of the zoomed area by pressing the + or - button.

2.Press the EXPAND button twice on the remote con- trol.

The normal screen display will appear on the screen.

•Display enlargement does not work with video input or S-video input.

•In EXPAND mode, you cannot adjust the zoom/fo- cus and the volume.

•The Expand mode may not function depending on the input signal. For more details, refer to page 29.

(FRAME POSI. (FRAME POSI. 5) 1~4)

1 2

4 3

Main Sub

image image

5.Press the PinP button on the remote control. The sub image will be disappear.

•Adjusting contrast, brightness, tint or color is not available in PinP mode.

•In PinP mode, both Main image and Sub image are displayed with their frames skipped.

•In PinP mode, the audio of the Main image is outputted.

•In PinP mode, the images may not move smoothly.

•The PinP mode may not function depending on the input signal. For more details, refer to page 29.

•The UXGA signal isn’t displayed as a sub image.

Still

How to stop the picture temporarily (still picture).

1.Press the STILL button on the remote control. The picture will freeze temporarily.

To resume picture activity.

2. Press the STILL button on the remote control again.

EN – 20