Mitsubishi Electronics ws-65413, WT-42413 manual Connecting an Audio Receiver, Stereo Audio System

Connecting an Audio Receiver

Note: The TV back panel and connections shown here are for reference only and may vary by model.

Stereo Audio System

(recommended for shelf units or A/V receivers without

digital audio inputs) (Figure 7)

1.Connect the audio cables from AUDIO MONITOR OUTPUT on the TV back panel to TV IN or AUX IN terminals on the back of the audio system.

•The red cable connects to the R (right) channel

•The white cable connects to the L (left) channel

2.Turn off the TV’s speakers through the AUDIO/ VIDEO SETTINGS Menu, page 58.

3.Set the audio system’s input to the TV or AUX position to hear the TV’s audio through your stereo system.

Additional connection cables are not provided with the TV. They should be available at most electronic stores.

Figure 7. Connecting the Stereo Audio System.

These types of audio connection do NOT support multi-channel digital audio. Please refer to your device’s Owner’s Guide to verify.

2AV Receiver (back panel section)

A/V Receiver

(Figure 8)

1.Connect either a video cable or an S-Video cable

(but not both) from VIDEO MONITOR OUT on the back of the A/V receiver to VIDEO INPUT-1 or INPUT- 2 on the TV back panel.

2.Connect a video cable from VIDEO MONITOR OUTPUT on the TV back panel to VIDEO TV IN on the back of the A/V receiver.

3.Connect a set of audio cables from AUDIO MONITOR OUTPUT on the TV back panel to AUDIO TV IN on the back of the A/V receiver.

•The red cable connects to the R (right) channel

•The white cable connects to the L (left) channel

	3	Yellow
Red	White
		1
		Attach
		only
		one
		cable
		type

TV back panel (section detail)

MONITOR		I N P U T
OUT	1		2

	S-Video
2	S-VIDEO

Yellow	Yellow 1
	V I D EO
White	AUDIO-
	LEFT /
	(MONO)
Red	AUDIO -
3
	RIGHT

Figure 8. Connecting the A/V Receiver.

Note: Please see your A/V receiver Owner’s Guide for more detailed connections.

17