Mitsubishi Electronics ws-65413, WT-42413, ws-55413 Channel Edit Menu Antenna, Channel Selection

CHANNEL EDIT Menu: Antenna, Channel Selection

���������

�����������������

�������� � � � � ��������

�������� � � � � �����

������� � � � � �������

������ � � � � ������

���� �		�	�	�	�	������
�	�	�	�	�	�	�����

����������������� ����������������

��� ������� ������ ������� ���������

Figure 32. Antenna

���������

�����������������

��������		�	�	�	�	��������
��������		�	�	�	�	�����
�������		�	�	�	�	�������
������		�	�	�	�	������
����	�	�	�	�	�	������
�	�	�	�	�	�	�����

����������������� �����������������

��� ������� ������ ����������������

Figure 33. Channel

Antenna

(Figure 32)

Select Ant-A or Ant-B. For each antenna, you can add or delete channels in memory, name channels, and add channels to the SQV (Super Quick View™) list.

Channel

(Figure 33)

Select to edit the channel selections. You can add or delete from memory, name, or add to the SQV (Super Quick View™) list.

After selecting Channel, editing can be done using the Adjust buttons or entering the  digit channel number you want to change (Example  for channel ).

For WS-, WS- and WS-, during NetCommand® IR setup, if you connected a cable box with an RF output other than channel  you can use the Channel Edit menu to tune the TV to the correct channel.

Change Antenna from Air to Cable. Then for the Channel, select  or , depending on your cable box requirement. The channel you select in this menu will be the fixed channel used with your cable box.

45