Mitsubishi Electronics ws-55413, WT-42413 manual Connecting a DVD Player or Other S-Video Device

Page 18

Connecting a DVD Player or Other S-Video Device

Note: The TV back panel and connections shown here are for reference only and may vary by model.

�

�

� �

� ��

� � �

��

� � ��

��

��

� � ��

��

��

��

��

��

��

	��	�
		�
	��
		��
��
��	��
��
�		��

�			��	�
		��	��	�
��	��

DVD Player with Component Video

(Figure 9)

1. Connect the Component Video cables from

(YCb Cr or YPbPr) VIDEO OUT on the back of

the DVD player to COMPONENT (1 or 2) on

the TV back panel. The correct connections are:

A. Y to Y

B. Cb or Pb to Pb

C. Cr or Pr to Pr

Figure 9. Connecting a DVD Player with Component Video.

See Appendix B, page 67, for component video

signal compatibility information.

For digital audio connections, see your DVD

and A/V receiver Owner’s Guides.

2. Connect a set of audio cables from AUDIO OUT
	on the back of the DVD player to COMPONENT
	AUDIO Input (1 or 2) on the TV back panel.
•	The red cable connects to the R (right)channel
•	The white cable connects to the L (left) channel

NOTE: Some video game systems support component connections. Please refer to your video game console Owner’s Guide.

�

��
� � � � �
�	�
			�
	��
	� � � ��
��	��
	��
	��
	��
��	��
	��
	� ��
��
��	��	��	��
��
	�	�	��
��	�	�	�
��			�
�	�	�

NOTE: If your DVD player supports progressive scan playback, be sure to set your player accordingly. You will also want to set your player to display 16:9 widescreen. Please refer to your DVD player’s Owner’s Guide.

Other S-Video Device

(Figure 10)

1.Connect an S-Video cable from VIDEO OUT on the device back panel to VIDEO INPUT-1 or INPUT-2 on the TV back panel.

2.Connect a set of audio cables from AUDIO OUT on the device back panel to AUDIO INPUT-1 or INPUT-2 on the TV back panel.

Figure 10. Connecting an S-Video Device.	•	The red cable connects to the R (right) channel
Figure 10. Connecting an S-Video Device.	•	The white cable connects to the L (left) channel

If your S-Video Device is mono (non-stereo), connect only the white (left) cable.

18

Image 18

Contents Owner’s Guide Projection Television ModelsRisk of Electric Shock do not Open Contents Power Source CleaningAccessories Power-Cord ProtectionReplacement Parts Power LinesDamage Requiring Service Safety CheckNews and stock-market report bars Letterbox top/bottom black barsSide bar images Shopping channel logos & pricing displaysChapter Television OverviewThank You for Your Purchase OUR PromiseSpecial Features Unpacking Your New TVNetCommand IR for models WS-, WS-, WS- Front Control Panel TimerReset FormatComponent Inputs 1-2 Component only for WT-42413 WS-48413, WS-55413, WS-65413 Back PanelConnections Connecting an Antenna or Wall Outlet Cable Separate UHF and VHF AntennasConnect the incoming cable to ANT-A on the TV back panel Antenna or Wall Outlet Cable Connecting an Antenna to a Cable Box or VCR Cable Box ANT-B on the TV back panelOne from LOOP-OUT on the TV back Panel to ANT-B on the TV back panelConnecting an Audio Receiver Stereo Audio SystemReceiver Connecting a DVD Player or Other S-Video Device DVD Player with Component VideoOther S-Video Device Connecting a DTV Receiver DTV Connectors and AdaptorsDTV Receiver with RGB Video Connections DTV ReceiverGreen Blue Pb/B Red Pr/R Connecting MonitorLink, NetCommand IR Emitter IR Emitter Repeater NetCommand IRMonitorLink/DVI † Component 2 is not available on the WT-42413 Remote Control Functions Remote Control Functions Overview of the TV Layer Buttons OverviewInstalling the Batteries Remote Control Functions Care and OperationOperating the Remote Control For Best Results from the Remote ControlCanceling the Sleep Timer Sleep TimerSetting the Sleep Timer Channel SelectionUse of the Remote Control with Other A/V Products Cable Box CodesDVD position LD Player Audio position ReceiverRemote Control Functions Special Functions Remote Control Functions Operation of PIP and POPActivating the PIP and POP Important Notes AUDIO/VIDEO Settings Menu Menu Screen OperationsMenu System Choice informationCaptions Menu Setup MenuMain Menu Screens Overview Channel Edit MenuSee pages - for more detailed setup information Advanced Features MenuAUDIO/VIDEO Settings Menu Chip Lock MenuMemorize Channels Memorize MenuInput Assignment Menu NetCommand IR Setup Menu NetCommand IR Device Learn Menu NetCommand IR Input Assignment Menu Device Selection MenuSetup Menu Manually Setting the Clock Clock Setting ManualSet Day Time Zone Setup Menu Automatically Setting the ClockClock Setting Auto Daylight Savings TimeSetup Menu Language, Front Button Lock WT- LanguageFront Button Lock for WT-42413 Setup Menu Energy Mode WS-, WS- WS- Energy ModeCaptions Menu Overview Translucent gray as the background color forCC Background Captions Menu Closed Captions, Background ColorClosed Captions Off No closed captionsChannel Edit Menu Antenna, Channel Selection AntennaChannel Channel Edit Menu Memory, Name Selection MemoryName Channel Edit Menu Using SQV Super Quick View Using The Menu ScreenUsing The Remote Control Chip Signal Information Chip Lock Menu OverviewSetting Up the V-CHIP Lock Passcode Entering the PasscodeAllowing or Blocking by Ratings Chip Hours / Lock by TimeLock by Time Front Button LockSelecting V-Chip Rating Menu Chip Hours Chip Start Time Chip Stop TimeAuto Color Correction Reset ColorColor Balance Menu PerfectColorAdvanced Features Menu TIMER, Timer Menu, and Set Time Timer menuSet Time Advanced Features Menu Set Day, Input, and Channel InputConvergence Screen Advanced Features Menu ConvergenceConvergence Menu Advanced ConvergenceVideo Mute Black EnhancementAUDIO/VIDEO Settings Menu Overview AUDIO/VIDEO Setting Descriptions Audio Audio SettingsAUDIO/VIDEO Setting Descriptions Video Video SettingsTroubleshooting Important Notes Index Warranty Operation of PIP and POPAvailable On-Screen Format Sizes Widescreen Picture 480i/480p Operation of PIP and POP Appendix a Bypassing the V-Chip Lock Bypassing the V-Chip LockThis page intentionally blank Input when Used With DVI Input Levels When Used With Component Video SignalsInput Levels when Used With RGB Video Signals Component InputsAppendix C Remote Control Programming Codes ReceiversDVD Players Satellite Receivers VCRsAppendix D Cleaning and Service CleaningLightly brush with a soft brush cloth, or lint brush Follow the steps below to install and remove Diamond Shield InstallationCabinet Separation for Model WS- Assuring a long, trouble-free life Terminal Cover Ventilation for Model WT-Wall At Least 2 Inches Away from WallTroubleshooting Problem Possible Solution Selected device does not display correctlyImportant Notes Stock-market report barsIndex Page Page Page  Mitsubishi Digital Electronics America, Inc DB