Mitsubishi Electronics WT-42413 DTV Receiver with RGB Video Connections, Green Blue Pb/B Red Pr/R

Page 20

Connecting a DTV Receiver, continued

Note: The TV back panel and connections shown here are for reference only and may vary by model.

��
				��			��
				��	��		��
				�	�		��
��		� � � � �		�	�
��	�	�	�	�	�	�
			�			�
			��	�	�	�	�	�
			�	�	�	�	�	�
			��			��
				��	�			�
			� ��	� �	�	�		�
				�			�
				��			�	��
			��	��
			��	� � ��
			��

��	��	�	��
��
	��

��	��	��
	��
IR EMITTER
REPEATER	NetCommand IR

��

	��
	��
��	��
��

�	�	�	�	��
			�	��
			��	��

		�	�		��	��
	�			�		��
	�		�	�	��
	��		�		��
	�	�	�
	�	�	�
��	��	�		��		��	��

�

��

�

��

��

�

��

�

Figure 13. Connecting the DTV receiver with RGB

video connections.

See Appendix B, page 67 for component video signal compatibility information.

For digital audio connections, see your DTV receiver and A/V receiver Owner’s Guides.

DTV Receiver with RGB Video Connections

(Figure 13)

1.Connect the outside antenna, cable, or satellite to ANT or SATELLITE IN on the DTV receiver (see your DTV receiver owner’s guide for instructions and cable compatibility).

2.If your DTV receiver has a built-in terrestrial tuner, connect the incoming terrestrial antenna to ANT on the DTV receiver. If your DTV receiver does not have a built-in terrestrial tuner, this TV will only be able to provide an analog signal through Ant-A on the TV back panel.

3.Connect the RGB cables from the DTV receiver to the TV back panel as listed below (if your DTV receiver uses BNC-type cables, use the adaptors shown in Figure 11, page 19):

DTV Receiver		TV Back Panel
G (green)	=	Y/G
B (blue)	=	Pb/B
R (red)	=	Pr/R

4.If the DTV receiver has outputs for H and V sync, connect as listed below (DO NOT connect if DTV receiver uses “Sync on Green”):

H (horizontal sync)	=	H
V (vertical sync)	=	V

5.Connect the L (left) and R (right) audio cables from the DTV receiver to DTV AUDIO on the TV back panel.

6.To utilize the benefits of a digital A/V receiver, connect your DTV receiver’s digital audio out to a digital input on your digital A/V receiver.

You may need to setup the DTV (See Input Assignment, page 35 for WT-42413 or page 38 for WS-48413, WS-55413, WS-65413) to RGB.

20

Image 20

Contents Owner’s Guide Projection Television ModelsRisk of Electric Shock do not Open Contents Cleaning AccessoriesPower Source Power-Cord ProtectionPower Lines Damage Requiring ServiceReplacement Parts Safety CheckLetterbox top/bottom black bars Side bar imagesNews and stock-market report bars Shopping channel logos & pricing displaysChapter Television OverviewThank You for Your Purchase OUR PromiseSpecial Features Unpacking Your New TVNetCommand IR for models WS-, WS-, WS- Timer ResetFront Control Panel FormatComponent Inputs 1-2 Component only for WT-42413 WS-48413, WS-55413, WS-65413 Back PanelConnections Connect the incoming cable to ANT-A on the TV back panel Connecting an Antenna or Wall Outlet CableSeparate UHF and VHF Antennas Connecting an Antenna to a Cable Box or VCR Cable BoxAntenna or Wall Outlet Cable ANT-B on the TV back panelOne from LOOP-OUT on the TV back Panel to ANT-B on the TV back panelReceiver Connecting an Audio ReceiverStereo Audio System Other S-Video Device Connecting a DVD Player or Other S-Video DeviceDVD Player with Component Video Connecting a DTV Receiver DTV Connectors and AdaptorsGreen Blue Pb/B Red Pr/R DTV Receiver with RGB Video ConnectionsDTV Receiver MonitorLink/DVI Connecting MonitorLink, NetCommand IR EmitterIR Emitter Repeater NetCommand IR † Component 2 is not available on the WT-42413 Remote Control Functions Remote Control Functions Overview of the TV Layer Buttons OverviewRemote Control Functions Care and Operation Operating the Remote ControlInstalling the Batteries For Best Results from the Remote ControlSleep Timer Setting the Sleep TimerCanceling the Sleep Timer Channel SelectionUse of the Remote Control with Other A/V Products Cable Box CodesDVD position LD Player Audio position ReceiverActivating the PIP and POP Remote Control Functions Special FunctionsRemote Control Functions Operation of PIP and POP Important Notes AUDIO/VIDEO Settings Menu Menu Screen OperationsMenu System Choice informationSetup Menu Main Menu Screens OverviewCaptions Menu Channel Edit MenuAdvanced Features Menu AUDIO/VIDEO Settings MenuSee pages - for more detailed setup information Chip Lock MenuInput Assignment Menu Memorize ChannelsMemorize Menu NetCommand IR Setup Menu NetCommand IR Device Learn Menu NetCommand IR Input Assignment Menu Device Selection MenuSet Day Setup Menu Manually Setting the ClockClock Setting Manual Setup Menu Automatically Setting the Clock Clock Setting AutoTime Zone Daylight Savings TimeFront Button Lock for WT-42413 Setup Menu Language, Front Button Lock WT-Language Setup Menu Energy Mode WS-, WS- WS- Energy ModeCaptions Menu Overview Translucent gray as the background color forCaptions Menu Closed Captions, Background Color Closed CaptionsCC Background Off No closed captionsChannel Channel Edit Menu Antenna, Channel SelectionAntenna Name Channel Edit Menu Memory, Name SelectionMemory Using The Remote Control Channel Edit Menu Using SQV Super Quick ViewUsing The Menu Screen Chip Signal Information Chip Lock Menu OverviewSetting Up the V-CHIP Lock Passcode Entering the PasscodeAllowing or Blocking by Ratings Chip Hours / Lock by TimeSelecting V-Chip Rating Menu Lock by TimeFront Button Lock Chip Hours Chip Start Time Chip Stop TimeReset Color Color Balance MenuAuto Color Correction PerfectColorSet Time Advanced Features Menu TIMER, Timer Menu, and Set TimeTimer menu Advanced Features Menu Set Day, Input, and Channel InputAdvanced Features Menu Convergence Convergence MenuConvergence Screen Advanced ConvergenceVideo Mute Black EnhancementAUDIO/VIDEO Settings Menu Overview AUDIO/VIDEO Setting Descriptions Audio Audio SettingsAUDIO/VIDEO Setting Descriptions Video Video SettingsTroubleshooting Important Notes Index Warranty Operation of PIP and POPAvailable On-Screen Format Sizes Widescreen Picture 480i/480p Operation of PIP and POP Appendix a Bypassing the V-Chip Lock Bypassing the V-Chip LockThis page intentionally blank Input Levels When Used With Component Video Signals Input Levels when Used With RGB Video SignalsInput when Used With DVI Component InputsDVD Players Appendix C Remote Control Programming CodesReceivers Satellite Receivers VCRsLightly brush with a soft brush cloth, or lint brush Appendix D Cleaning and ServiceCleaning Follow the steps below to install and remove Diamond Shield InstallationCabinet Separation for Model WS- Terminal Cover Ventilation for Model WT- WallAssuring a long, trouble-free life At Least 2 Inches Away from WallTroubleshooting Problem Possible Solution Selected device does not display correctlyImportant Notes Stock-market report barsIndex Page Page Page  Mitsubishi Digital Electronics America, Inc DB