Mitsubishi Electronics 737 SERIES, 837 SERIES manual Switching Audio to and from the A/V Receiver

6	NetCommand IR Control of an A/V
	Receiver

51

Several types of A/V receiver control can be set up using the Inputs > AVR menu.

•Power and volume. See the next page.

•Audio switching. For most equipment setups, see “Case 1: Automatic A/V Receiver Switching to the TV Audio Input” page 53.

•Audio switching and surround sound. To set up switching to a surround sound device, see “Case

2:Automatic A/V Receiver Switching to a Surround Sound Device” page 54

•Audio and video switching over HDMI. If your A/V receiver has an HDMI output, it may be con- venient to send audio and video to the TV over a single HDMI cable through the A/V receiver. See “Case 3: Automatic Audio and Video Switching via HDMI,” page 55.

Note: To set up control of other device types, see “Initial NetCommand Setup,” page 47.

Controlling an A/V Receiver after NetCommand Setup

Switching Audio to and from the A/V Receiver

1.Press MORE and then 9 (AUDIO).

2.Press to show the Speakers option.

3.Press to select either AV Receiver or TV.

Controlling A/V Receiver Power

With Any Connection Type

1.Press MORE and then 9 (AUDIO).

2.Press to show the Speakers option.

3.Press to select AV Receiver.

4.Point the remote control at the TV (not the A/V receiver) and press POWER to power the A/V receiver on or off.

With an HDMI Connection

1.Press ACTIVITY.

2.Highlight the A/V receiver icon.

3.Press POWER.

Controlling Other A/V Receiver Functions

With the A/V receiver powered on and selected, the TV’s remote control operates the volume and mute functions. Also, when you switch to a device in the Activity menu, the A/V receiver automatically switches to the correct audio input for the device.