Mitsubishi Electronics 837 SERIES manual Cleaning Recommendations, Care of the Remote Control

Page 72

72Appendices

Appendix D: TV Care, continued

Cleaning Recommendations

Normally, light dusting with a dry, non-scratching duster will keep your TV clean. If cleaning beyond this is needed, please use the following guidelines:

First, turn off the TV and unplug the power cord from the power outlet.

Occasionally clean dust build-up from the air-intake grilles on the back and sides of the TV. Clean using a vacuum cleaner with a brush attachment.

Top and Sides of the TV

Gently wipe down your TV with a soft, non-abrasive cloth such as cotton flannel, microfiber, or a clean cloth diaper, lightly moistened with water. Dry with a second dry, soft, non-abrasive cloth.

For oily dirt, add a few drops of mild liquid deter- gent, such as dishwashing detergent, to the water used to moisten the cloth. Rinse with a second cloth moistened only with water. Dry with a third dry, soft, non-abrasive cloth.

Screen

Follow the instructions for the top and sides, wiping gently in an up and down motion.

Clean the entire screen evenly, not just sections of the screen.

Do not allow liquid to drip down the screen, as some liquid may enter the TV through the gap between the screen and screen frame.

You may purchase Mitsubishi Screen Cleaner, part number CLEANER-VSS, by calling (800) 553-7278.

General Cleaning Precautions

DO NOT allow liquid to enter the TV through the ventilation slots or any crevice.

DO NOT use any strong or abrasive cleaners, as these can scratch the surfaces.

DO NOT use any cleaners containing ammonia, bleach, alcohol, benzene, or thinners, as these can dull the surfaces.

DO NOT spray liquids or cleaners directly on the TV’s surfaces.

DO NOT scrub or rub the TV harshly. Wipe it gently.

Care of the Remote Control

Remote Control Tips

For longer life, use alkaline batteries.

Do not mix old and new batteries.

Be within 20 feet of the equipment.

Do not press two or more keys at the same time unless instructed to do so.

Do not allow the unit to get wet or become heated.

Keep the unit out of direct sunlight.

Avoid dropping on hard surfaces.

Do not use harsh chemicals to clean. Use only a soft, lightly moistened cloth.

Resetting the Remote Control

If TV mode is selected and the TV does not respond properly, reset the remote control.

1.Press and hold POWER for several seconds until the mode indicator blinks twice and goes off.

2.Release the POWER key.

3.Press keys 0 0 9 3 5 and the mode indicator will blink twice when you finish entering the code. When entering the code, pause for a moment between each key press to ensure it is recognized.

Low-Battery Indicator

If you press a key and the mode indicator blinks five times, replace the remote control’s batteries.

Image 72
Contents C9 Series Stand Requirement TV Model Stand ModelMB-S73A Contents Installation and Operating Notes Lamp ReplacementInternal Fans TV SoftwareReplacement Parts Outdoor Antenna GroundingSpecial Features of Your TV Package Contents First-Time Power-OnRemote Control Batteries Before You BeginRemote Control TV ControlsSystem Reset TV Control PanelStatus Light Panel-Lock ReleaseSetting Up TV Inputs Using the ANT Antenna InputSetting Up Other Inputs Memorizing Channels with Channel Scan For the ANT inputAbout Auto Input Sensing Auto Output Sensing HdmiAVR Audio Output Basic TV Operation Selecting an Input to WatchWatching Broadcast TV Watching DVDs or VideosMaking Picture Adjustments Audio SettingsOther TV Features Other InformationAuto Input Sensing Connection TypesPicture Quality Surround SoundInputs and Outputs Main Connection PanelConvenience Inputs IR-NetCommand Output ANT AntennaHdmi Inputs High-Definition Multimedia Interface Pb Pr Component VideoPb Pr Component Video Device Hdmi DeviceHdtv Cable Box, Satellite Receiver, DVD/ Blu-ray Player SatelliteDVI Video Device Composite Video DeviceCable Box, Satellite Receiver, DVD Player VCR or other device with composite videoVCR or DVD Recorder to an Antenna or Wall Outlet Cable VCR or DVD Recorder to a Cable BoxRF Splitter Cable boxReceiver Receiver with Hdmi OutputSleep Timer Selecting an InputSleep Controlling A/V Receiver Sound Volume ChannelView Channel ListingsRedirecting Audio Output Status Display About Channel NumbersStandard-Definition Analog Channels Standard-Definition Digital ChannelsTV Signals and Display Formats Signal DefinitionsDVD Image Definitions TV Display Format DefinitionsInitial Setup 3D VideoWatching 3D Video To Watch Regular non-3D VideoConnecting a Computer to the TV Computer Video Connection Audio Video OutputUsing the TV with a Personal Computer Computer Video AdjustmentsImage Resolution Computer Display FormatsCamera Images and Music Files USB Media Player MenuPlaying a Slide Show or Playlist Series TVs OnlyThumbnail and Playlist Menus USB Media Setup Menu ActivityPicture Files Compatible with the USB Port Slideshow + Music --Slideshow Music onlyPhotos and Moving Video As Composite Video Press ACTIVITY, select Watch Movie Cam, and press EnterOptional Audio Cable Source device connected directly to the TV Introduction to Home-Theater ControlMain Menu Menu NavigationAdjust Using PerfectColor Using PerfecTint 837 Series3D Mode On, Off Picture+ PerfectColor PerfectColor SlidersFrom the Adjust Picture menu From the Adjust Audio menu SAPCaptions Captions on Analog ChannelsCaptions on Digital Channels Initial DSTAdding/Deleting Channels Using the Channel Edit Menu Channel Ant AirAnt Cable ScanInputs How is the Activity Menu Generated? Photos MusicDVD DVD2 DVR USB VCRLock Parental TV-YTV-G TV-PGLock by Time Lock TimeUnlock Time Other Menu Options alternate rating systemAbout NetCommand IR Control Important Note on NetCommandIR Emitter Placement If You are Unable to Locate a Device’s IR SensorInitial NetCommand Setup Adding or Removing Device Keys from NetCommand ControlIf the device has no Power OFF key, skip this step Operating NetCommand-Controlled Devices Special Operation Description and Setup How to UseControlling Most Device Types Special Operation MethodsMore Key Menu and NetCommand SP/EPNetCommand Specialized Device Keys Switching Audio to and from the A/V Receiver Controlling A/V Receiver PowerControlling Other A/V Receiver Functions With Any Connection TypeSetting Up A/V Receiver Control Power and VolumeSetup to Control A/V Receiver Power and Volume Before You BeginAutomatic Audio or Audio/Video Switching DVD Input key Case 3 Automatic Audio Video Switching via Hdmi More About Using an Hdmi ConnectionBefore You Begin DVD playerOpen the Inputs Learn menu Appendices Appendix a Programming the Remote Control Functions Available for Other A/V DevicesMore Menus TV modesProgramming the Remote Control Audio Lock Universal A/V Receiver ControlDVD CABLE/SAT VCR DVD AudioProgramming Codes Audio AmplifiersCable Boxes Satellite Receivers VCRsGFM HI-QKEC KTVDVD and Blu-ray Players GPX IRTJMB JSIMitsubishi Home Theater TV Bypassing the Parental LockThis page intentionally left blank Appendix C Hdmi Control of CEC Devices Enabling Hdmi Control of CEC DevicesDevice does not have CEC compatibility Action Hdmi Control of an Hdmi A/V Receiver and Connected Devices OptionalUsing Hdmi Control Resolving CEC ConflictsLamp-Cartridge Replacement and Cleaning Appendix D TV CareLamp Part Number 915B403001 Lamp-Cartridge Replacement Installing the New Lamp CartridgeLamp-Cartridge Filter Cleaning Removing the Old Lamp CartridgeCleaning Recommendations Care of the Remote ControlAppendix E Troubleshooting TV Reset Comparison GuideService and Customer Support ServiceInitial Channel Edit menu If the New DeviceNew Device Found screen Read the ON-SCREENGeneral TV Operation Symptom Remarks TV Channels Symptom Remarks TV Power On/Off Symptom RemarksPicture Symptom Remarks Sound Symptom RemarksReceiver Set Up for Audio and Video Switching over Receiver with Hdmi ControlAppendices79 Trademark and License Information Mitsubishi TV Software GNU General Public License No Warranty Mitsubishi DLP Projection Television Limited Warranty To Obtain Warranty ServiceThis Limited Warranty does not Cover Mitsubishi Digital Electronics AMERICA, INCIndex HdmiIndex87 MDEAservice@mdea.com System Reset

837 SERIES, 737 SERIES specifications

Mitsubishi Electronics has established itself as a key player in the world of automation and control with its innovative series of programmable logic controllers (PLCs), notably the 737 Series and 837 Series. These PLCs are designed to meet the rigorous demands of modern industrial automation, providing a blend of versatility, efficiency, and advanced technology.

The Mitsubishi 737 Series PLC is renowned for its compact design and high processing power. A significant feature of this series is its modular architecture, allowing users to expand and customize their systems according to specific application needs. The 737 Series is equipped with advanced I/O options, offering diverse configurations that support both digital and analog inputs and outputs. This multiplicity equips operators with remarkable flexibility for various automation processes, from simple machine control to complex manufacturing systems.

On the other hand, the 837 Series separates itself through an extensive range of built-in functionalities and connectivity options. One critical feature of the 837 Series is its high-speed processing capabilities. The controller effectively executes ladder programming and structured text, allowing engineers to develop complex control algorithms seamlessly. Additionally, the 837 Series supports Ethernet and other communication protocols, enabling easy integration in networked environments. This connectivity enhances real-time data sharing and remote monitoring, ensuring improved operational efficiency.

Both series utilize Mitsubishi Electronics' proprietary technologies, such as the MELSEC system, which promotes high reliability and ease of use. The user-friendly programming environment supports both graphical and textual programming, accommodating developers with varying skill levels. Moreover, Mitsubishi’s Cyber Security features ensure that the systems remain secure against potential threats in an increasingly connected industrial landscape.

In terms of energy efficiency and sustainability, both the 737 and 837 Series PLCs incorporate advanced power management capabilities, reducing energy consumption while maintaining optimal performance. Their robust build quality also ensures longevity in harsh industrial conditions, securing investments and enhancing overall operational reliability.

In conclusion, the Mitsubishi 737 Series and 837 Series PLCs represent the forefront of automation technology, providing essential features, cutting-edge processing power, and unmatched flexibility. Their integration into industrial applications continues to propel efficiency and innovation across various sectors, solidifying Mitsubishi Electronics’ reputation as a leader in automation solutions.