Lamp-Cartridge Replacement

Appendices71

Appendix D: TV Care, continued

Removing the Old Lamp Cartridge

1.Turn off TV power and unplug the TV. Allow the lamp to cool for at least one hour before proceed- ing.

2.After the lamp has cooled, remove the cover of the lamp compartment, located on the back of the TV.

Refer to figures 1 and 2. Use a #2 (medium) Phillips screwdriver to loosen the screw securing the cover. Keep the screw and cover for re-installation

3.With a medium Phillips screwdriver, loosen the two screws securing the lamp cartridge until they dis- engage from the mating threads. These are captive screws and cannot be separated from the lamp cartridge.

4.Fully open the bag supplied with the replacement lamp and set the opened bag aside.

5.Gently grasp the handle of the lamp cartridge and pull the old cartridge straight out. See figure 3.

CAUTION: Do not tilt or rotate the cartridge, as small glass fragments may fall out.

6.Without tilting or putting down the lamp cartridge, insert it into the opened bag. Close the bag while being careful not to let any glass particles fall out.

Installing the New Lamp Cartridge

1.Do not touch the glass parts of the new lamp car- tridge. Insert the new cartridge into the TV in the same orientation as the old cartridge. Push on the cartridge housing until it is fully seated.

2.Gently tighten the screws with the screwdriver.

AVOID OVERTIGHTENING!

3.Replace the plastic cover and retaining screws.

4.WASH YOUR HANDS THOROUGHLY, AS THIS LAMP CONTAINS MERCURY.

Disposal of the Old Lamp Cartridge

Lamp under warranty: All lamps replaced under war- ranty must be returned to Mitsubishi. Use the return shipping label provided and send to Mitsubishi Digital Electronics, America, 625 Braselton Parkway, Suite 200, Braselton, GA 30517.

IMPORTANT: Lamps found to be without defect will be returned and charged back to the sender.

Lamp no longer under warranty: Contact your local authorities or the Electronic Industries Alliance at www.eiae.org for lamp-disposal or recycling instructions. Do not dispose of the old lamp with common trash.

Figure 1

Figure 2

Figure 3

Use only replacement lamp part number 915B403001.

Lamp-Cartridge Filter Cleaning

If the TV shuts off after displaying the message “TV will shut down in a few seconds. Please check if the air flow is blocked” and/or the STATUS LED is yellow, the air filter may need cleaning. The air filter is part of the lamp cartridge. Use the following procedure to clean the filter.

1.Remove the lamp cartridge from the TV as described under “Removing the Old Lamp Car- tridge.” Do not tilt or rotate the cartridge. Do not touch the glass parts of the lamp cartridge.

2.Holding the lamp cartridge horizontal (do not tilt or rotate), use a soft dry brush or vacuum cleaner to remove any dust that may be present on the mesh filter. Do not use liquids. See figure 4.

3.Reinstall the lamp cartridge as described under “Installing the New Lamp Cartridge.”

Figure 4

Keep lamp cartridge horizontal and remove dust from the mesh filter using a vacuum cleaner or soft dry brush.

837 SERIES, 737 SERIES specifications

Mitsubishi Electronics has established itself as a key player in the world of automation and control with its innovative series of programmable logic controllers (PLCs), notably the 737 Series and 837 Series. These PLCs are designed to meet the rigorous demands of modern industrial automation, providing a blend of versatility, efficiency, and advanced technology.

The Mitsubishi 737 Series PLC is renowned for its compact design and high processing power. A significant feature of this series is its modular architecture, allowing users to expand and customize their systems according to specific application needs. The 737 Series is equipped with advanced I/O options, offering diverse configurations that support both digital and analog inputs and outputs. This multiplicity equips operators with remarkable flexibility for various automation processes, from simple machine control to complex manufacturing systems.

On the other hand, the 837 Series separates itself through an extensive range of built-in functionalities and connectivity options. One critical feature of the 837 Series is its high-speed processing capabilities. The controller effectively executes ladder programming and structured text, allowing engineers to develop complex control algorithms seamlessly. Additionally, the 837 Series supports Ethernet and other communication protocols, enabling easy integration in networked environments. This connectivity enhances real-time data sharing and remote monitoring, ensuring improved operational efficiency.

Both series utilize Mitsubishi Electronics' proprietary technologies, such as the MELSEC system, which promotes high reliability and ease of use. The user-friendly programming environment supports both graphical and textual programming, accommodating developers with varying skill levels. Moreover, Mitsubishi’s Cyber Security features ensure that the systems remain secure against potential threats in an increasingly connected industrial landscape.

In terms of energy efficiency and sustainability, both the 737 and 837 Series PLCs incorporate advanced power management capabilities, reducing energy consumption while maintaining optimal performance. Their robust build quality also ensures longevity in harsh industrial conditions, securing investments and enhancing overall operational reliability.

In conclusion, the Mitsubishi 737 Series and 837 Series PLCs represent the forefront of automation technology, providing essential features, cutting-edge processing power, and unmatched flexibility. Their integration into industrial applications continues to propel efficiency and innovation across various sectors, solidifying Mitsubishi Electronics’ reputation as a leader in automation solutions.