One for All URC 9800 manual Setting UP Additional Home Entertainment Components

Page 13

24

SETTING UP ADDITIONAL HOME

ENTERTAINMENT COMPONENTS

Besides the device keys that are already labeled (TV, VCR, CBL, etc.), the Home Producer can also operate the following components: Cassette Decks, Home Automation, Digital Audio Tape, Turntables, Video Accessories, and Miscellaneous Audio Components (e.g., Graphic Equalizers and Digital Music Service Boxes).

The Set Up codes for these devices can be accessed under the following device keys:

Cassette Decks:

Use the AUX1 Key

Home Automation:

Use the CD Key

Digital Audio Tape:

Use the AUX1 Key

Turntables:

Use the CD Key

Video Accessories:

Use the CBL/SAT Key

(Note: Web TV found under Video Accessories)

Miscellaneous Audio: Use the AMP Key

NOTE: Each device key (e.g., TV, VCR, CBL/SAT, etc.) can only operate one component at a time. If you have already set up a component on a key, then assigning a second component on the same key will erase the code for the first component you set up. For example, if you set up a DVD Player on DVD and then set up a Turntable on DVD, the Home Producer will only operate the Turntable.

For example, to set up a Cassette Deck on the AUX1 key:

NOTE: If the four-digit code for your device begins with a “0”, only the last three numbers of your code will be displayed.

1

Turn on your Cassette Deck.

2

Press and release the AUX1 key.

3

Press and hold SETUP until the

 

display screen changes from

 

[TAPE and the TIME] to [TIME SEQ].

4

Press the MENU – key one time.

 

The display screen will change to

 

[CODE SETUP]. Press SELECT.

 

The display will change to

 

[DEV SET UP].

5

Press SELECT and the display

 

screen will change to [TAPE].

 

25

6

Press MENU – to toggle between

 

[TAPE] and [DAT]. Once [TAPE] is

 

on the display screen, enter the first

 

Cassette Deck code listed for your

 

brand in the “Set Up Codes for

 

Cassette Decks” on the next page,

 

then press SELECT.

7

Point the remote control at the

 

Cassette Deck and press POWER.

 

Your Cassette Deck should turn

 

OFF. Then press the ESC key to

 

return the display to [TAPE and the

 

TIME]. If your Cassette Deck does

 

not turn OFF, enter the next code in

 

the code list then press SELECT

 

followed by POWER again. Once

 

the correct code is entered, press

 

the ESC key to return the display to

 

[TAPE and the TIME].

Re-assigning Device Keys

You can use the Home Producer to operate a sec- ond TV or a second VCR or any combination of eight devices. To do this, you must re-assign one of the device keys (i.e., TV, VCR, DVD, CBL/SAT, TUNER, AMP, CD, or AUX1) to operate your sec- ond device. For example, to re-assign one of the device keys to support your other components:

1

Press and hold SETUP until the

 

display screen changes from

 

[DVD/LDP and the TIME] to

 

[TIMED SEQ].

2x 2 Press the MENU – key twice. The display screen will change to [CONFIGURE]. Press SELECT. The display will change to [THEATR SEL].

3x 3 Press the MENU – key three times. The display screen will change to [MODE MAP]. Press SELECT. The display will change to [SOURCE].

Page 12 Page 14
Image 13
Page 12 Page 14
Contents URC Home Producer User Guide Installing the Batteries ContentsFeatures and Functions Using Your Home ProducerFeature Function Keys are not mode specific Setting the ClockPIP, REW, PLAY, FF, STOP, Timed SEQQuick SET-UP Set Up Codes for TVs Setting UP Individual HomeTo Set Up Your Television DEV SET UPTo Set Up Your VCR or TV/VCR Combinations Set Up Codes For VCRsSet Up Codes for TV/VCR Combinations Set Up Codes For VCRs To Set Up Your Cable BoxSet Up Codes for DSS and Satellite Receivers Set Up Codes For Cable BoxesTo Set Up Your DSS or Satellite Receiver To Set Up Your CD or MD Player Set Up Codes for LD PlayersTo Set Up Your Tuner/Receiver Set Up Codes for CD or MD PlayersSet Up Codes for Amplifiers Set Up Codes For Tuner/ReceiversTo Set Up Your Amplifier Re-assigning Device Keys Setting UP Additional Home Entertainment ComponentsSearching for Your Code Setting UP the Home Theater KEY Device Key TV, VCR, CBL/SAT or DVD to Sequence Tuner + Power + TV + PowerDevice Key TV, CBL/SAT, or VCR to choose Device Key KeysTV, CBL/SAT, VCR, TunerLearning Functions Onto the 1L Through 6L Keys Time Deleting Functions from the L keysSEQ Select againTo Delete a Timed Sequence SAT + Power + SAT + 2 + 7 + 5 ++ TV/SAT to change the input on the TV to Video 1 + SAT + HOW to USE the Shift KEYCluded, press ESC to save Volume Lock HOW to USE the Sleep KEYWill use its own built-in sleep timer To return volume control to a componentKeymover Clear ALL Setting UP and Using the IR/RF Command CenterCLR ALL Command Center Setting UP and Using the IR/RFTroubleshooting SpecificationsCompliance with the FCC Rules and Regulations CH +/- and Prev Error MessagesTV Functions KEY Index+ The Prog key Shift + Menu operates your secondary menus VCR Functions PIP key accesses your VCR’s Picture-in-Picture featureCenter and Rear Shift + Cable Functions PIP key accesses your Picture- in-Picture featuresDSS & Satellite Functions DVD/LD/Cassette Functions+ The Display key Shift + Prev CH operates the display on Receiver/Tuner FunctionsBalance Right Amplifier FunctionsKeys on your original remote control Track access the same as the digitCD Functions Digit keys 0 9 control directHome Automation Functions WarrantyPage URC-9800 REV a Home Producer M9800
Top Page Image Contents