One for All URC 9800 manual Error Messages, CH +/- and Prev

Page 26

50

TROUBLESHOOTING (cont.)

Problem: Solution

CH +/- and PREV

Due to RCA design (1983-

CH not working for

1987), only the original

your RCA TV?

remote control will operate

 

these functions.

 

 

Problems changing

If your original remote control

channels?

required an ENTER keystroke

 

when changing channels,

 

press the ENTER key on the

 

Home Producer after you

 

enter the channel number.

 

 

The red light blinks

Make sure you are aiming

when you press a

your Home Producer at your

key but you receive

home entertainment compo-

no response from

nent and that you are within

your home entertain-

15 feet before using your

ment component?

remote control.

 

 

Your audio compo-

Some audio components may

nents turn on and off

need both a Tuner/Receiver

and control volume

code and an Audio Amplifier

but do not change

code to control all of the fea-

preset channels?

tures of your audio component.

 

 

Your DSS satellite

The codes listed in this man-

receiver does not

ual are set up to operate your

respond to the

DSS receiver on the 1st or

codes listed in the

2nd addresses only. Make

manual?

sure the DSS Receiver can

 

be operated with an infrared

 

remote control and is not set

 

up to only receive Radio

 

Frequency.

 

 

The Home Producer

Some Bang & Olufsen prod-

is not operating your

ucts, as well as some other

Bang & Olufsen

manufacturer’s equipment

equipment?

operate at a frequency higher

 

than 100 kHz and will not

 

work with the Home Producer.

 

 

51

ERROR MESSAGES

ErrorMeaning

MEM FULL

Maximum memory capacity

 

has been reached.

 

 

BATTERY LO

Replace batteries with four

 

new "AAA" Alkaline batteries.

 

 

TOO LONG

Macro sequence being entered

 

exceeds 15 keystrokes.

 

 

LIST END

You have reached the end of

 

all valid codes using the

 

Step-N-Set sequence.

 

 

INVALID

Displayed when trying to

 

specify a key that is not valid

 

for the sequence being

 

entered. For example, when

 

selecting a Device Key (e.g.,

 

TV) for a Macro sequence.

 

 

NOT FOUND

Displayed when you enter in

 

a code that is not valid for the

 

device being programmed.

 

 

ERROR

Displayed when an error has

 

occurred in the learning

 

sequence.

 

 

Consumer Help Line: 1-330-593-3325

World Wide Web: http://www.hudsonag.com

E-mail help: Help@hudsonag.com

Image 26
Contents URC Home Producer User Guide Contents Installing the BatteriesFeature Function Using Your Home ProducerFeatures and Functions PIP, REW, PLAY, FF, STOP, Setting the ClockKeys are not mode specific Timed SEQQuick SET-UP To Set Up Your Television Setting UP Individual HomeSet Up Codes for TVs DEV SET UPSet Up Codes For VCRs To Set Up Your VCR or TV/VCR CombinationsSet Up Codes For VCRs To Set Up Your Cable Box Set Up Codes for TV/VCR CombinationsTo Set Up Your DSS or Satellite Receiver Set Up Codes For Cable BoxesSet Up Codes for DSS and Satellite Receivers Set Up Codes for LD Players To Set Up Your CD or MD PlayerSet Up Codes for CD or MD Players To Set Up Your Tuner/ReceiverTo Set Up Your Amplifier Set Up Codes For Tuner/ReceiversSet Up Codes for Amplifiers Setting UP Additional Home Entertainment Components Re-assigning Device KeysSearching for Your Code Setting UP the Home Theater KEY Device Key TV, CBL/SAT, or VCR to choose Sequence Tuner + Power + TV + PowerDevice Key TV, VCR, CBL/SAT or DVD to Device Key KeysTV, CBL/SAT, VCR, TunerLearning Functions Onto the 1L Through 6L Keys SEQ Deleting Functions from the L keysTime Select againSAT + Power + SAT + 2 + 7 + 5 + To Delete a Timed SequenceCluded, press ESC to save HOW to USE the Shift KEY+ TV/SAT to change the input on the TV to Video 1 + SAT + Will use its own built-in sleep timer HOW to USE the Sleep KEYVolume Lock To return volume control to a componentKeymover CLR ALL Setting UP and Using the IR/RF Command CenterClear ALL Setting UP and Using the IR/RF Command CenterCompliance with the FCC Rules and Regulations SpecificationsTroubleshooting Error Messages CH +/- and Prev+ The Prog key Shift + Menu operates your secondary menus KEY IndexTV Functions Center and Rear Shift + PIP key accesses your VCR’s Picture-in-Picture featureVCR Functions PIP key accesses your Picture- in-Picture features Cable FunctionsDVD/LD/Cassette Functions DSS & Satellite FunctionsBalance Right Receiver/Tuner Functions+ The Display key Shift + Prev CH operates the display on Amplifier FunctionsCD Functions Track access the same as the digitKeys on your original remote control Digit keys 0 9 control directWarranty Home Automation FunctionsPage URC-9800 REV a Home Producer M9800

URC 9800 specifications

The One for All URC 9800 remote control is a versatile and innovative device designed to simplify the way you manage your home entertainment system. With its sleek design and user-friendly interface, it caters to consumers looking for an efficient way to control multiple devices from a single remote.

One of the standout features of the URC 9800 is its ability to support up to eight devices. This means you can seamlessly control your television, Blu-ray player, sound system, streaming devices, and more, all from one central point. This eliminates the clutter of multiple remotes and streamlines your viewing experience.

The remote employs Smart Technology, which automatically detects and integrates your devices. This feature significantly reduces the time needed for setup. Users simply follow a straightforward process that guides them in configuring their devices, ensuring a hassle-free experience.

Another notable characteristic is the URC 9800's detailed LCD screen. This display provides users with a clear overview of the devices currently in use and access to specific functions such as volume control and channel changing. The screen's backlight feature enhances visibility in low-light conditions, making it easier to use during evening movie nights or late-night TV sessions.

Additionally, the remote offers a “Learning Function.” This useful capability allows users to program certain buttons to perform specific tasks or replicate functions from their original remotes. For instance, you can customize a button to turn on your TV and set the correct input mode, making it easier to start watching your favorite show with a single press.

Compatibility is another major advantage of the One for All URC 9800. It supports devices from numerous brands, making it an excellent choice for households with diverse equipment. The extensive database ensures that most popular brands and models are covered.

Lastly, the ergonomic design of the remote is tailored for comfort. Its layout supports easy navigation and minimal strain during prolonged use, which is particularly useful for avid movie watchers or gamers.

In summary, the One for All URC 9800 remote control combines functionality with user-centric design. Its ability to control multiple devices, Smart Technology setup, LCD display, Learning Function, broad compatibility, and ergonomic design make it an essential tool for anyone looking to enhance their home entertainment experience.