6
Feature Function
The CH + (Channel Up) and CH – (Channel Down) keys change channels the same as the Channel Up and Down keys on your original remote.
The MACRO and MACRO2 keys memorize up to 15 keystrokes that can be accessed in sequence at the press of a single key. These
keys are not mode specific.
The SHIFT key accesses advanced features that are mapped under the following keys: CENTER, MENU,
SELECT, MUTE, PREV CH,
PIP, REW, PLAY, FF, STOP, and
PAUSE.
The 1L ~ 6L keys are used for learning new features onto the Home Producer. See pages 32 to 33 for further details.
NOTE: For a detailed explanation of what function each key will perform by device type (e.g.,TV, VCR, CBL/SAT,etc.), please refer to pages 52 through 64.
7
SETTING THE CLOCK
To set up the CLOCK/TIME on the display screen:
1 | Press and hold SETUP until the |
| display screen changes from |
| [DEVICE and the TIME] to |
| [TIMED SEQ]. |
2x 2 Press the MENU – key twice, the display will change to [CONFIGURE]. Press SELECT, the display will
change to [THEATR SEL].
3 | Press MENU – one time, the display |
| will change to [TIME SETUP]. |
| Press SELECT again. |
4 0 - 9 The display will change to [TIME] and the first digit in the time will blink. Enter either a 0 or a 1, then the next digit in the time will begin to blink, continue entering the time until all four digits of the time have been set.
5 | After the time has been set, AM/PM |
| will then blink. Press MENU – to |
| toggle between AM and PM, once |
| AM or PM is selected, press |
| SELECT. |
6 | The display will then change to the |
| day of the week (i.e., MON, TUE, |
| WED, THU, FRI, SAT or SUN). Use |
| MENU – to toggle through the days |
| until the proper day of the week is |
| displayed on the screen, then press |
| SELECT. The display will return to |
| the [DEVICE and the TIME] screen |
| with the correct time on the display. |
NOTE: After changing the batteries, you will have to reprogram the clock.